Abstract:The article discusses the importance of optimizing process parameters in 3D printing to achieve better mechanical properties of printed parts. It emphasizes the material extrusion 3D printing technology and some of the most commonly used materials, acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG). Optimizable process parameters such as, print angle, outer layer number, extruder flow ratio, extrusion (nozzle) temperature, and layer thickness are examined. The article also highlights the importance of postprocessing techniques, specifically thermal postprocessing (annealing) and chemical postprocessing in the acetone (AC) chamber, to enhance mechanical properties of printed parts. The results show that the wall structures played a crucial role in defining mechanical properties, acting as main load-bearing elements. Adjusted flow ratios influenced mechanical properties. Samples with a 25% extruder flow rate increase demonstrated a 44% rise in elongation at break, while a 50% increase led to slight strength reduction. The ABS material AC-treated sample exhibited 58.2% lower tensile strength and 1.9% lower elongation due to stress concentration, while thermally treated showed similar results to the default, printed at manufacturer-recommended settings. The PETG material AC-treated sample exhibited 53.2% lower tensile strength, but 17.5% higher elongation, while thermally treated showed similar results to the default. Samples printed at 0° orientation exhibited plastic deformation with the highest tensile strength and elongation, while samples at 45° and 90° orientations experienced delamination, leading to brittle fracture, proving that the orientation and interlayer adhesion have a great influence on mechanical properties. While the print settings and orientation had similar effects on mechanical properties of each material, postprocessing effects are greatly influenced by the polymer matrix.

Influences of Process Parameters on Mechanical Properties of ABS/Aluminum Powder Blending Products

The impact of injection molding process parameters on mechanical properties and microstructure of PC/ABS blends using Taguchi approach

The Influences of Solid Loading and Molding Variables on Alumina Injection Molding

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Study of Processing Parameters in Fused Deposition Modeling Based on Mechanical Properties of Acrylonitrile‐butadiene‐styrene Filament

Study on the influence of in-mold sequential injection molding process parameters on mechanical properties of self-reinforced single composites

A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts

Effect of processing parameter changes on mechanical properties during injection molding: Amorphous versus semi‐crystalline materials

The Effect of Aluminium Injection Parameters on the Mechanical Properties of the Material Produced by High Pressure Die-Casting

Study on Thermoplastic Binder and Mixing Technology for Alumina Ceramic Injection Molding

Process parameter–mechanical property relationships and influence mechanism of advanced CFF/PEEK thermoplastic composites

Influence of Processing Parameters in Injection Molding on the Properties of Short Carbon and Glass Fiber Reinforced Polypropylene Composites

Experimental study on mechanical behaviors of injection molded PC/PMMA blends

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process

Maximizing Mechanical Performance of 3D Printed Parts Through Process Parameter Optimization

Influence of Processing Parameters on the Mechanical Properties of Peek Plates by Hot Compression Molding

Studying the effects of FDM process parameters on the mechanical properties of parts produced from PLA using response surface methodology

Study on Processing Parameters of Ceramic Injection Moulding

Effect of process parameters on microstructure and mechanical properties of a nickel-aluminum-bronze alloy fabricated by laser powder bed fusion

Optimization of the injection molding process for the PC/ABS parts by integrating Taguchi approach and CAE simulation