Abstract:The steady and unsteady flow properties of the National Aeronautics and Space Administration (NASA) single-stage transonic compressor stage 35 are numerically investigated through the Reynolds-averaged Navier–Stokes (RANS) simulation method. The main purpose of the present paper is twofold. One is to validate the capability of the Spalart–Allmaras (S–A)-Helicity-γ model in unsteady RANS (URANS) simulation for rotor–stator interaction of a whole-stage compressor, and another is to figure out the roles played by helicity modification and transition augmentation in improving the performance of traditional S–A model. The results of steady RANS simulation indicate that the S–A model with helicity regulation is more sensitive to vortex structures in the end wall and blade-tip regions, while the inclusion of transitional intermittency factor can help predict the important transition phenomenon in the midspan region. As the back pressure increases, the inaccuracy of flow fields exchange caused by the mixing plane method becomes nonnegligible for the prediction of aerodynamic performance and thermodynamic quantities. Thus, URANS simulation seems to be necessary for more accurate prediction of the flow details of the stator subjected to periodic sweep of the rotor wake. On the suction surface of the stator, a turbulent separation bubble near the leading edge is transported downstream and merges into another separation bubble with much lower turbulence intensity at the trailing edge periodically. The combination of helicity and transition modifications provides advantages over traditional S–A model in describing this process, quite similar to its performance in steady simulations.

Unsteady Numerical Study on the Compressor Aerodynamics Performance of Curved-sweep Rotor Blade

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Investigation of Positive Bowed Stator on Off-design Characteristics in a Multistage Compressor

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

Numerical simulation of unsteady single-stage transonic axial compressor flow

An Aerodynamic Design and Numerical Investigation of Transonic Centrifugal Compressor Stage

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

Numerical Prediction of Multi-Stage Axial Compressor Performances

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage

Numerical study of the coherent characteristics of the blade tip of a micro centrifugal compressor and its application in a new unsteady casing-treatment experiment

NUMERICAL INVESTIGATION OF FLOW FIELD IN A 1.5-STAGE TRANSONIC COMPRESSOR

Design of A Single-Stage Centrifugal Compressor and Numerical Investigation of Simultaneous Adjustment of Inlet Guide Vanes and Diffuser Vanes

Optimization of cantilevered stators in an industrial multistage compressor to improve efficiency

Uncertainty quantification and sensitivity analysis of blade geometric deviation on compressor performance

AERODYNAMICS OPTIMUM DESIGN OF COMPRESSOR BLADES BASED ON NUMERICAL OVERALL PERFORMANCE CALCULATION

Calculation of the Overall Aerodynamic Performance of Multi-Stage Axial-Flow Compressor

Effects of unsteady interaction on the performance of an ultra-high-pressure-ratio centrifugal compressor

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor