Abstract:The plasticized starch exhibits flexible properties, similar to that of elastomer. In this paper, thermoplastic starch acetate (TPAS) and maleic anhydride grafted poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS‐MAH) were used to toughen polypropylene (PP) through melt blending. It is found TPAS and SEBS‐MAH have a synergistic toughening effect on PP, especially the notched impact strength of PP/TPAS/SEBS‐MAH (70/15/15) blend is as high as 83.4 kJ/m2, but only 7.2 kJ/m2 of that for PP/TPAS/SEBS (70/15/15) blend. The structure‐property relationship of the PP/TPAS/SEBS‐MAH blends was investigated. Compared with PP/TPAS/SEBS (70/15/15) blend, the TPAS domains are dispersed homogeneously in the PP/TPAS/SEBS‐MAH (70/15/15) blend with the domain size of TPAS less than 0.2 μm. The incorporation of SEBS‐MAH not only improves the compatibility between PP and TPAS but also facilitates the formation of a core‐shell structure with TPAS as the core and SEBS‐MAH as the shell. Thus formed core‐shell particles play an important role in toughening PP. The spreading coefficient of the multiphase blend reveals that only when the SEBS‐MAH content is higher than TPAS, the core‐shell structure can be formed. Otherwise, TPAS and SEBS‐MAH will disperse separately and the toughness will not be improved. This work provides a new insight into polymer toughening with TPAS. In the case of PP/TPAS/SEBS blends, SEBS and TPAS dispersed separately. For PP/TPAS/SEBS‐MAH blends, the size of TPAS was lower than that of TPAS in the PP/TPAS/SEBS blends at a given content. It indicates the compatibility between PP and TPAS was improved significantly due to the presence of SEBS‐MAH. Only when the content of SEBS‐MAH is not less than TPAS, a core‐shell structure with TPAS as the core and SEBS‐MAH as the shell can be formed, which plays an important role in PP toughening.

Toughening mechanism in polyoxymethylene/thermoplastic polyurethane blends

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Morphology and Mechanical Properties of Blends of Thermoplastic Polyurethane and Polyolefins

Toughening Effects of "Core-Shell" Particles in PA6/SEBS-g-MA/PPO Blends

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Synergistic toughening of polypropylene by thermoplastic starch acetate and SEBS‐MAH

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

Toughening Polypropylene by Tiny Amounts of Fillers

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

Design of Phase-containing Particles with Core-shell Morphology and Their Toughening Condition on POM Resin

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend