Abstract:With the aim to improve the separation efficiency of hydraulic vortex separator (HDVS) in recirculating biofloc technology (RBFT) system,three HDVSs with different structural parameters were studied by using numerical method of computational fluid dynamics (CFD).The simulations of the solidliquid phase flow in HDVSs were conducted based on an Eulerian-Eulerian multi-phase turbulence 3-D model combined with the kinetic theory of granular flow,which specifically analyzed the velocity contours,vector contours,streamlines of liquid phase,inner and outlet distribution characters of solid phase.The simulation results showed that with the increase of α,the velocity field below the inlet part and surrounding area of the sleeve had small difference at the inlet velocity of 0.36 m/s.But the difference of results of inner region of sleeve was stark and the turbulence was enhanced in this regions.In addition,some swirls occurred in the inner zone of the sleeve,which added energy waste and had negative effect on the flocs separation.The separation efficiency of HDVS had a negative correlation with the increase of α.When α was 1.5,the removal efficiency was 27％,which was more effective than 17％ (α was 2.0).But when α was increased from 2.0 to 2.5,the HDVSs almost had the same solid phase volume fraction at the outlet and the separation efficiencies only had a small change.To validate the accuracy of simulation results,the simulation values and experimental data were compared.The good agreement of the flow velocity and change law of the separation efficiency proves that the mentioned two fluid model (TFM) can be used to optimize the structure of HDVS.

CFD simulations for structural parameter design of airlift bioreactors

CFD Simulation on an Internal Loop Air-lift Bioreactor with a Volume of 16 L

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Structural Parameter Optimization of Hydraulic Vertox Separator in Recirculating Biofloc Technology System Based on Computational Fluid Dynamics

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

CFD Simulation and Structural Optimization in a Novel Airlift Reversible Loop Bioreactor

CFD simulation for comparative of hydrodynamic effects in biochemical reactors using population balance model with varied inlet gas distribution profiles

CFD as a Tool to Optimize Aeration Tank Design and Operation

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

CFD Modeling and Simulation of an Annulus Sparged Air-lift Bioreactor

CFD-PBM simulations the effect of aeration rates on hydrodynamics characteristics in a gas-liquid-solid aerobic fluidized bed biofilm reactor

Hydrodynamic Character of Internal-Loop Airlift Reactor

Cfd Simulation of the Hydrodynamics in an Industrial Scale Cyclohexane Oxidation Airlift Loop Reactor

CFD Simulations to Portray the Bubble Distribution and the Hydrodynamics in an Annulus Sparged Air‐lift Bioreactor

CFD-PBM Simulation and Scale-Up of the Pilot-Scale Bioreactor

Experimental Study and Cfd Simulation of Hydrodynamic Behaviours in an External Loop Airlift Slurry Reactor

Hydrodynamics and mass transfer of concentric-tube internal loop airlift reactors: A review

Optimization of the Internal Circulating Fluidized Bed Using Computational Fluid Dynamics Technology

A novel method using CFD to optimize the inner structure parameters of flat photobioreactors

CFD Simulation of Stirred Bioreactor and Its Application in the Inosine Production

Computational investigation of fluid dynamics in a recently developed centrifugal impeller bioreactor