Abstract:A method for the preparation of polyimide (PI) nanofoams with high thermal stability, which can be used as dielectric layers in microelectronics, has been presented in this paper. Polystyrene (PS) and poly[styrene-co-(4-vinylpyridine)] (PSVP) nanospheres were prepared by emulsion polymerization. The diameter of these particles was 30 to 40 nm. PMDA-ODA PI nanocomposite films with various contents of PS and PSVP were obtained by in-situ condensation polymerization in the presence of nanospheres. The distribution of the nanospheres in the films and the morphology of the films were characterized by TEM. Relatively homogeneous distributions were observed for the PI/PSVP nanocomposite films, which can be ascribed to the formation of poly(amic acid) amine salts between pyridinyl and carboxyl moieties. The transport properties of CO2, O-2 N-2, and CH4 gases through these nanocomposite films were measured. For the PI/PS-nanosphere composite films, with the increase of PS nanospheres in the films, the gas permeabilities increased and selectivities decreased: these were due to the increase in gas diffusion coefficients and the decrease in diffusion selectivities. For PI/PSVP-nanosphere composite films, increases in both gas permeabilities and selectivities were observed when the PSVP-nanospheres increased from 10 to 20 wt% in the films, while both the diffusion coefficients and diffusion selectivities decreased. It was found that the membrane containing 20 wt% PSVP-nanospheres showed both high gas permeability and high permselectivity toward CO2. These results can be ascribed to the high solubility of CO2 and 0, in the pyridine-containing polymers and the relatively homogenous distribution of PSVP-nanospheres in the PI matrix. Upon thermal treatment, the thermally unstable nanospheres undergo thermolysis, leaving pores with the size and shape dictated by the initial nanosphere morphology. The resulted foams were characterized by TEM, DSC, TG, density measurements and dielectric constant measurements. The results revealed that nanofoams with high thermal stability and low dielectric constant approaching 2.0 could be prepared using PI nanocomposite approach.

Nanoporous Low-? Polyimide Films Prepared from Poly(amic Acid)s with Grafted Poly(methylmethacrylate)/poly(acrylamide) Side Chains

Nanoporous Low‐κ Polyimide Films Via Poly(amic Acid)s with Grafted Poly(ethylene Glycol) Side Chains from a Reversible Addition–Fragmentation Chain‐Transfer‐Mediated Process

Synthesis of poly(propylene glycol)-grafted polyimide precursors and preparation of nanoporous polyimides

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Preparation and Properties of Nanoporous Polyimide Films with Low Dielectric Permittivity

Mesoporous polyetherimide thin films via hydrolysis of polylactide-b-polyetherimide-b-polylactide

Porous polyimide composite films containing mesoporous hollow silica nanospheres with ultralow dielectric constant and dissipation loss

2021 pioneering investigator issue: mesoporous polyetherimide thin films <i>via</i> hydrolysis of polylactide-<i>b</i>-polyetherimide-<i>b</i>-polylactide

Low dielectric polyimide microsphere/polyimide composite films based on porous polyimide microsphere

Synthesis and Properties of a High‐molecular‐weight Poly(amic Acid) and Polyimide Based on 2,2‐Bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane

Preparation of Nanoporous Polyimide Thin Films Via Layer-By-Layer Self-Assembly of Cowpea Mosaic Virus and Poly(Amic Acid)

Preparation and Characterization of Anisotropic Chain Structures in Polyimide Films

Low Dielectric Constant Polyimide Hybrid Films Prepared by in Situ Blow-Balloon Method

Synthesis of porous polyimide films with low dielectric constant and excellent mechanical properties by ambient pressure drying

Polyimide/Polystyrene Nanocomposite Films As Membranes For Gas Separation And Precursors For Polyimide Nanofoams

Polyimide–polydimethylsiloxane Copolymers for Low‐dielectric‐constant and Moisture‐resistance Applications

Tailored Ultralow Dielectric Permittivity in High-Performance Fluorinated Polyimide Films by Adjusting Nanoporous Characterisitics

Low dielectric constant ultrathin polyimide films alternated by poly(amic acid) salt/poly(allylamine hydrochloride)/imogolite through layer by layer deposition

Organosoluble polyimides with low dielectric constant prepared from an asymmetric diamine containing bulky m-trifluoromethyl phenyl group

Synthesis and Properties of Optically Transparent Fluoro-Containing Polyimide Films with Reduced Linear Coefficients of Thermal Expansion from Organo-Soluble Resins Derived from Aromatic Diamine with Benzanilide Units

Ultra-low-? Polyimide Hybrid Films Via Copolymerization of Polyimide and Polyoxometalates