Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

Investigation on Part Load Characteristics of Gas Turbine with a Lean-burn Catalytic Combustion Chamber

Part-load performance characteristics of a lean burn catalytic combustion gas turbine system

Methodology to Separate the Two Burn Stages of Natural-Gas Lean Premixed-Combustion Inside a Diesel Geometry

Analysis of Two-Stage Natural-Gas Lean Combustion Inside a Diesel Geometry

Study on the Flame Transition Characteristics of a Gas Turbine Combustor

Operation Window and Part-Load Performance Study of a Syngas Fired Gas Turbine

PART-LOAD PERFORMANCE OF A COMBINED CYCLE WITH OXYGEN-CARRIER COMBUSTION

Lean Premixed And Low Nox Combustor With Recirculation Ratio Of Fuel Gas Controllable

Optimization of gas turbine performance based on low-Btu fuels

Multimode Operation Control Strategy for Improving Part-Load Performance of Supercritical CO2 Brayton Cycle

Experimental Investigation of Lean Methane–Air Laminar Premixed Flames at Engine-Relevant Temperatures

Investigation of the Influence of Different Control Strategies on the Part Load Performance for the R-Graz Cycle

Effect of Natural Gas Composition on Low Nox Burners Operation in Heavy Duty Gas Turbine

Multimode operation control strategy for improving part-load performance of supercritical CO 2 Brayton cycle

Lean Premixed and Low NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Combustor with Recirculation Ratio of Fuel Gas Controllable

Study on combustion and emission characteristics of a heavy-duty gas turbine combustor fueled with natural gas

Multi-objective performance optimization and control for gas turbine Part-load operation Energy-saving and NOx emission reduction

Load-regulation characteristics of gas turbine combined cycle power system controlled with compressor inlet air heating

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

Investigations on combustion system optimization of a heavy-duty natural gas engine

Experimental Study on Combustion Stability Characteristics in Liquid-Fueled Gas Turbine Model Combustor: Fuel Sensitivities and Flame/flow Dynamics