Abstract:Air worthiness requirements of the aircraft engine emission bring new challenges to the combustor research and design. With the motivation to design high performance and clean combustor, computational fluid dynamics (CFD) is utilized as the powerful design approach. In this paper, Reynolds averaged Navier-Stokes (RANS) equations of reactive two-phase flow in an experimental low emission combustor is performed. The numerical approach uses an implicit compressible gas solver together with a Lagrangian liquid-phase tracking method and the extended coherent flamelet model for turbulence-combustion interaction. The NOx formation is modeled by the concept of post-processing, which resolves the NOx transport equation with the assumption of frozen temperature distribution. Both turbulence-combustion interaction model and NOx formation model are firstly evaluated by the comparison of experimental data published in open literature of a lean direct injection (LDI) combustor. The test rig studied in this paper is called low emission stirred swirl (LESS) combustor, which is a two-stage model combustor, fueled with liquid kerosene (RP-3) and designed by Beihang University (BUAA). The main stage of LESS combustor employs the principle of lean prevaporized and premixed (LPP) concept to reduce pollutant, and the pilot stage depends on a diffusion flame for flame stabilization. Detailed numerical results including species distribution, turbulence performance and burning performance are qualitatively and quantitatively evaluated. Numerical prediction of NOx emission shows a good agreement with test data at both idle condition and full power condition of LESS combustor. Preliminary results of the flame structure are shown in this paper. The flame stabilization mechanism and NOx reduction effort are also discussed with in-depth analysis.

Lean Premixed and Low NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Combustor with Recirculation Ratio of Fuel Gas Controllable

Lean Premixed And Low Nox Combustor With Recirculation Ratio Of Fuel Gas Controllable

Experimental Study of Flow Characteristic in Low NO_x Combustor with Controllable Flue Gas Recirculation

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Emission Characteristics And Axial Flame Temperature Distribution Of A Circumferential Reverse Flow Combustor

B109 EMISSION CHARACTERISTICS AND AXIAL FLAME TEMPERATURE DISTRIBUTION OF A CIRCUMFERENTIAL REVERSE FLOW COMBUSTOR(Combustion-3)

Analysis of the Mixing and Emission Characteristics in a Model Combustor

Experimental and Numerical Studies of a Lean-Burn Internally-Staged Combustor

Investigation of the Combustion Performance in a Three-Nozzle RQL Combustor

Kinetics Modeling on NOx Emissions of a Syngas Turbine Combustor Using Rich-Burn, Quick-Mix, Lean-Burn Combustion Method

Experimental And Numerical Investigations Of Low-Swirl Multi-Nozzle Combustion In A Lean Premixed Combustor

Experimental Investigation on Combustion and Emission Characteristics of Rich-Burn/Quick-Quench/Lean-Burn (RQL)Combustor

Kinetics Modeling On Nox Emissions Of A Syngas Turbine Combustor Using Rql Combustion Method

Study on premixing uniformity and emission of R0110 combustor

Numerical Investigation on Flow Characteristics and Emissions under Varying Swirler Vane Angle in a Lean Premixed Combustor

Experimental Investigations and Large-Eddy Simulation of Low-Swirl Combustion in a Lean Premixed Multi-Nozzle Combustor

A Numerical Study of the Fuel/air Mixing Law Specific to the Premixing Section of a Gas Turbine Combustor

Emission Characteristics of a Model Combustor for Aero Gas Turbine Application

Research on combustion performance of a micro-mixing combustor for methane-fueled gas turbine

CFD Study of NOx Emissions in a Model Commercial Aircraft Engine Combustor

Study of Flow and Combustion Characteristics of Optimized Low Swirl Premixed Nozzle for Micro Gas Turbine