Abstract:Modern gas turbines in power systems employ lean premixed combustion to lower flame temperature and thus achieve low NOx emissions. The fuel/air mixing process and its impacts on emissions are of paramount importance to combustor performance. In this study, the mixing process in a methane-fired model combustor was studied through an integrated experimental and numerical study. The experimental results show that at the dump location, the time-averaged fuel/air unmixedness is less than 10% over a wide range of testing conditions, demonstrating the good mixing performance of the specific premixer on the time-averaged level. A study of the effects of turbulent Schmidt number on the unmixedness prediction shows that for the complex flow field involved, it is challenging for Reynolds-Averaged Navier-Stokes (RANS) simulations with constant turbulent Schmidt number to accurately predict the mixing process throughout the combustor. Further analysis reveals that the production and scalar dissipation are the key physical processes controlling the fuel/air mixing. Finally, the NOx formation in this model combustor was analyzed and modelled through a flamelet-based approach, in which NOx formation is characterized through flame-front NOx and its post-flame formation rate obtained from one-dimensional laminar premixed flames. The effect of fuel/air unmixedness on NOx formation is accounted for through the presumed probability density functions (PDF) of mixture fraction. Results show that the measured NOx in the model combustor are bounded by the model predictions with the fuel/air unmixedness being 3% and 5% of the maximum unmixedness. In the context of RANS, the accuracy in NOx prediction depends on the unmixedness prediction which is sensitive to turbulent Schmidt number.

Study on premixing uniformity and emission of R0110 combustor

Analysis on the Issue of Fuel/Air Premixing Uniformity of the Dry Low NOx Gas Turbine Combustor

Emission Peformance of the Dry Low NO Combustors for R0110 Heavy-duty Gas Turbine

Structural Optimization Strategy of Improving the Premixing Uniformity in a Low NOxCombustor

Analysis of the Mixing and Emission Characteristics in a Model Combustor

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Performance Test Of Dln Combustor For 110 Mw Heavy-Duty Gas Turbine

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Numerical Studies of a Water-cooled Premixed Burner for Low NO x Combustion of Natural Gas

EXPERIMENTAL STUDY ON NON-UNIFORMITY OF FUEL-AIR PREMIXING IN A DLN COMBUSTOR

NO<i><sub>x</sub></i> emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system

Optimization of Annular Combustion Zone for Heavy Duty Gas Turbine DLN Combustor

Research on combustion performance of a micro-mixing combustor for methane-fueled gas turbine

Analysis and Experiments about the Characteristics of Mixing Process in the Premixed Gas Turbine

An Analysis of the Methods for Estimating the Dry Low NOx Pollutant Emissions from a Combustor

NO<i><sub>x</sub></i> emission and thermal performances studies on premixed ammonia-oxygen combustion in a CO<sub>2</sub>-free micro-planar combustor

Kinetics Modeling on NOx Emissions of a Syngas Turbine Combustor Using Rich-Burn, Quick-Mix, Lean-Burn Combustion Method

A Numerical Study of the Fuel/air Mixing Law Specific to the Premixing Section of a Gas Turbine Combustor

Study on NO emissions during the coupling process of preheating-combustion of pulverized coal with multi-air staging

Investigation of NOx emission under different burner structures with the optimized combustion model

NO emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system