Abstract:Using ascorbic acid as a reducing agent, AgNO3 as silver salts and polyethylene glycol 4000(PEG-4000) as dispersant, sub-micron spherical silver powders were prepared by a liquid-phase reduction method. By means of the orthogonal design of three factors and three levels, the effects of the following factors on the particles size of silver powders were studied, including the concentration of ascorbic acid, the way of dispersant addition into solution and the pH value of the solution. The optimized preparation conditions of sub-micron spherical silver powders were obtained. The sub-micron spherical silver powders could be synthesized under the conditions of pH=5, AgNO3 concentration of 0.5 mol/L, adding half of the dispersant to the AgNO3 and ascorbic acid solution, C6H8O6 concentration of 0.9 mol/L, PEG-4000/AgNO3 mass ratio of 1.2 and at room temperature. The sub-micron spherical silver powders were characterized by laser particle distribution analyzer, SEM and XRD. The results show that the prepared silver powders are pure, with uniform particle size distribution and spherical shape under optimized experiment conditions. The paste prepared with the obtained silver powders was printed on the silicon, and the square resistance of the sintered film is 0.721 m Omega/square, indicating the electrical property of the prepared silver is qualified for solar cells.

Preparation of Ultrafine Silver Powder Using Ascorbic Acid As Reducing Agent and Its Application in MLCI

Preparation of fine copper powder using ascorbic acid as reducing agent and its application in MLCC

Preparation of Monodispersed Ultra-fine Spherical Silver Particles by Liquid Phase Chemical Reduction Method

Preparation of Fine Copper Powder with Chemical Reduction Method and Its Application in Mlcc

Production of Ultrafine Global Silver Powder Applied in Electronic Materials

Study on Preparation of High-Performance Flake Silver Powder by Liquid Phase Reduction

Preparation of Micron Size Flake Silver Powders for Conductive Thick Films

Study on the factors affecting the morphology of silver powder in liquid phase chemical reduction

Preparation and Characterization of Silver Powders with Spheric Shape and Different Sizes

Effect of AgNO3 solution property on morphology and grain size of ultrafine silver powder

Container-Free Microfluidic Chemical Reduction for Synthesizing Ultrafine Silver Powder and Fabricating Silver Paste

Study on the influence factors of silver powders size was prepared by liquid-phase reduction method

Synthesis of silver powder with micro-nano size by chemical reduction

Preparation of Ultrafine Silver Powder by Reduction of Glucose

Preparation of Ultrafine Silver Powder and Its Electrical Properties

Preparation and Microstructure of Silver Nanopowder with Spheric Morphology

Preparation of Disperse Silver Particles by Chemical Reduction

Preparation of Micron-Sized Plate-Like Silver Powders Used in Silver Paste by Wet-Chemical Reduction Method

Preparation and Characterization of High-Temperature Silver Thick Film and Its Application in Multilayer Chip Inductances

Preparation of Micron Silver Powder by Multistep Reduction and Its Crystal Growth Characteristics

Preparation of Sub-micron Spherical Silver Powders for Solar Cell Paste