Abstract:Low energy, high current density ion implantation at elevated temperatures has been shown to improve significantly the tribological properties of various materials. This paper summarizes the results published previously in this research area and presents some new results. Comparisons of this technique are made with ion nitriding and high energy ion implantation conducted under similar conditions (treatment temperature, treatment time and so on) on austenitic stainless steel and tool steel materials. The microstructural analyses and tribological evaluations presented here show that all three techniques generate almost identical microstructures on each metal studied, but low energy ion implantation produces treated layers with higher nitrogen concentrations and deeper diffusion, leading to higher wear resistance. A physical model is proposed to explore the mechanisms for these advantageous phenomena. The analysis suggests that a high current density is the primary mechanism responsible for the formation of deep nitrogen-containing layers. The ion energy is of secondary importance, as long as it is sufficiently high to overcome certain surface barrier potentials, to allow the removal of native oxide layers, to prevent surface oxidation and to allow the build-up of a high concentration of atomic nitrogen on the top of the treated surface to facilitate subsequent fast diffusion. Some applications and limitations of this technique are also addressed. It seems evident that low energy implantation (slightly higher than for ion nitriding, but much lower than for high energy ion implantation) at high current densities (much higher than those used in both ion nitriding and high energy implantation) generates superior nitrogen-containing layers on many materials, and hence the superior tribological performance compared to the other two techniques.

Properties of Titanium Nitride Fabricated on Stainless Steel by Plasma-Based Ion Implantation/Deposition

Plasma Spray Deposition Enhancement of Titanium Nitride Layer Using Nitrogen-Contained Plasma Irradiation of Titanium Substrate as a Pre-spraying Method

Plasma Nitridation and Mechanical Properties of Pure Titanium Casts

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Evaluation of titanium nitride/titanium aluminum nitride thin film coating, plasma nitriding on AISI 304 stainless steel using the plasma-assisted physical vapor deposition process, and thermal stress investigated through finite-element analysis

Adhesion and growth of titanium nitride coating deposited on AISI 316L using cylindrical magnetron sputtering

In Vitro Corrosion Behavior of TiN Layer Produced on Orthopedic Nickel–titanium Shape Memory Alloy by Nitrogen Plasma Immersion Ion Implantation Using Different Frequencies

Characterization of TiN, TiC and TiCN coatings on Ti–50.6 at.% Ni alloy deposited by PIII and deposition technique

Mechanism of Mechanical Property Enhancement in Nitrogen and Titanium Implanted 321 Stainless Steel

Formation of TiN films on biomedical NiTi shape memory alloy by PIIID

Microstructure and Mechanical Properties of Titanium Nitride Coatings for Cemented Carbide Cutting Tools by Pulsed High Energy Density Plasma

Structure and Wear Properties of NiTi Modified by Nitrogen Plasma Immersion Ion Implantation

Surface Characterization and Electrochemical Studies of Biomedical Niti Alloy Coated with Tin by Piiid

Low energy, high current density ion implantation of materials at elevated temperatures for tribological applications

Effects of Plasma Polymerization on the Performance of Biomedical Titanium

Structure and Properties of Bioactive Titanium Dioxide Surface Layers Produced on NiTi Shape Memory Alloy in Low-Temperature Plasma

Effects of Nitrogen Ion Implantation and Implantation Energy on Surface Properties and Adhesion Strength of TiN Films Deposited on Aluminum by Magnetron Sputtering

Effects Of Carbon And Nitrogen Plasma Immersion Ion Implantation On In Vitro And In Vivo Biocompatibility Of Titanium Alloy

Tribological Investigation of W-Ti-N Thin Film on Plasma Nitrided Stainless-Steel Multilayer Coating

Study of surface modification of metal ion-implanted with TiN

Tantalum Coated NiTi Alloy by PIIID for Biomedical Application