Abstract:NiTi shape memory alloy is one of the promising orthopedic materials due to the unique shape memory effect and superelasticity. However, the large amount of Ni in the alloy may cause allergic reactions and toxic effects thereby limiting its applications. In this work, the surface of NiTi alloy was modified by nitrogen plasma immersion ion implantation (N-PIII) at various voltages. The materials were characterized by X-ray photoelectron spectroscopy (XPS). The topography and roughness before and after N-PIII were measured by atomic force microscope. The effects of the modified surfaces on nickel release and cytotoxicity were assessed by immersion tests and cell cultures. The XPS results reveal that near-surface Ni concentration is significantly reduced by PIII and the surface TiN layer suppresses nickel release and favors osteoblast proliferation, especially for samples implanted at higher voltages. The surfaces produced at higher voltages of 30 and 40 kV show better adhesion ability to osteoblasts compared to the unimplanted and 20 kV PIII samples. The effects of heating during PIII on the phase transformation behavior and cyclic deformation response of the materials were investigated by differential scanning calorimetry and three-point bending tests. Our results show that N-PIlI conducted using the proper conditions improves the biocompatibility and mechanical properties of the NiTi alloy significantly. (c) 2007 Wiley Periodicals, Inc.

Formation of TiN films on biomedical NiTi shape memory alloy by PIIID

Modification of Biomedical NiTi Shape Memory Alloy by TiC/Ti Films Using PIIID

Surface Characterization and Electrochemical Studies of Biomedical Niti Alloy Coated with Tin by Piiid

Tantalum Coated NiTi Alloy by PIIID for Biomedical Application

Characterization of TiN, TiC and TiCN coatings on Ti–50.6 at.% Ni alloy deposited by PIII and deposition technique

A Study Of Zrn/Zr Coatings Deposited On Niti Alloy By Piiid Technique

Enhanced Corrosion Resistance of Zr Coating on Biomedical Tini Alloy Prepared by Plasma Immersion Ion Implantation and Deposition

Surface Characterization and Mechanical Property of Tin/Ti-Coated Niti Alloy by Piiid

Calcium filling of TiO2 nanotubes on the surface of NiTi shape memory alloys by plasma immersion ion implantation

Effect of N2 / Ar Gas Flow Ratio on the Deposition of TiN/Ti Coatings on NiTi Shape Memory Alloy by PIIID

Deposition of DLC coating on biomedical TiNi alloys by plasma based ion implantation to improve surface properties

Suppression of Nickel Out-Diffusion from Porous Nickel-Titanium Shape Memory Alloy by Plasma Immersion Ion Implantation

Surface Characteristics, Biocompatibility, And Mechanical Properties Of Nickel-Titanium Plasma-Implanted With Nitrogen At Different Implantation Voltages

In Vitro Corrosion Behavior of TiN Layer Produced on Orthopedic Nickel–titanium Shape Memory Alloy by Nitrogen Plasma Immersion Ion Implantation Using Different Frequencies

Bioactivity and Corrosion Resistance of NiTi after Calcium Plasma Immersion Ion Implantation

Enhanced Bioactivity of Biomedical Niti Through Surface Plasma Polymerization

Deposition of TiN coatings on shape memory NiTi alloy by plasma immersion ion implantation and deposition

Nano-Scale Surface Morphology, Wettability and Osteoblast Adhesion on Nitrogen Plasma-Implanted NiTi Shape Memory Alloy

Experimental investigation of tribo-mechanical and chemical properties of TiN PVD coating on titanium substrate for biomedical implants manufacturing

Plasma Surface Modification of Nickel Titanium Shape Memory Alloys

The corrosion behavior and hemocompatibility of TiNi alloys coated with DLC by plasma based ion implantation