Abstract:The insulation coordination for converter station is one of the key technologies to implement flexible DC power transmission projects, and the results of the research on this field can provide important guidance to the design, type selection, manufacture and test of converter equipments in converter stations. To decide insulation levels for equipments of converter stations in Zhoushan multi-terminal flexible DC power transmission project reasonably, the arrester layout schemes for converter stations are proposed; corresponding arrester parameters and protection levels are calculated; the recommended insulation margins for equipments in converter stations are given and based on the selected equipment insulation margins the insulation levels for equipments in converter stations are finally determined. Insulation coordination results corresponding to three different arrester layout schemes are given and the coordination results show that different arrester layout schemes mainly influence on the insulation levels among terminals of reactors connected to bridge arms:for the first arrester layout scheme, the insulation levels of lightning impulse and that of switching impulse among reactor terminals connected to bridge arms are 450 kV and 325 kV respectively, and for the second and the third arrester layout schemes the insulation levels among reactor terminals connected to bridge arms are the same and the insulation level of lightning impulse and that of switching impulse are 750 kV and 550 kV respectively. Except reactors connected to bridge arms, the recommended insulation levels for other equipments in converter stations under all arrester layout schemes are the same;for AC equipments at valve side of converter transformer the insulation levels of lightning impulse are recommended as 650 kV (or 750 kV) and the insulation level of switching impulse is recommended as 550 kV; the insulation level of lightning impulse and that of switching impulse for AC equipments at valve side of bridge arm reactors are taken the same as these for equipments at valve side of converter transformer; the insulation levels of lightning impulse of 200 kV DC buses in converter stations are recommended as 650 kV (or 750 kV) and that of switching impulse is recommended as 550 kV; the insulation levels of lightning impulse and these of switching impulse among terminals of DC smoothing reactors are taken as 850 kV (or 950 kV) and 750 kV respectively. Besides, the advantages and disadvantages of the three arrester layout schemes are analyzed. Results of this research topic can offer important foundation for Zhoushan multi-terminal flexible DC power transmission project and are available for reference to other VSC-HVDC projects.

Study of overvoltage protection and insulation coordination for MMC based HVDC

Study of Overvoltage Protection and Insulation Coordination for MMC Based HVDC

Research on transient overvoltage for converter station of Zhoushan multi-terminal VSC-HVDC project

Influence of Control and Protection Characteristics on Insulation Coordination of MMC-HVDC System

Analysis on Insulation Coordination Scheme for ±800 Kv DC Converter Station

On the DC Transient Overvoltage in the Converter Stations of ±800 Kv Xiluodu Zhexi HVDC Project

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

A Feasible Coordination Protection Strategy for MMC-MTDC Systems under DC Faults

Study on overvoltage and insulation coordination of DC filter for ±800 kV UHVDC project from Xiangjiaba to Shanghai

Comparison of Insulation Coordination Between ±800kv and ±1100kv UHVDC Systems

Studies on DC Fault Protection Strategies for MMC Based HVDC Grid

Overvoltage Research and Insulation Coordination for HVDC Transmission System Based on Medium-Frequency DRU-MMC

Application of MMC with Embedded Energy Storage for Overvoltage Suppression and Fault Ride-through Improvement in Series LCC-MMC Hybrid HVDC System

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Overvoltage Protection and Insulation Coordination for ?1 100 Kv UHVDC Converter Station

Overcurrent mechanism and suppression control for MMC arms in hybrid cascaded HVDC system

Analysis of Submodule Capacitor Overvoltage During DC-side Fault in Hybrid MMC-based HVDC System

Overvoltage Protection and Insulation Coordination for ±1100 kV UHVDC Converter Station

Analysis of Fault and Protection Strategy of a Converter Station in MMC-HVDC System

Protection of Nonpermanent Faults on DC Overhead Lines in MMC-Based HVDC Systems

Research on Insulation Coordination for Converter Stations of Zhoushan Multi-Terminal VSC-HVDC Transmission Project