Abstract:The recycling of industrial wastes instead of their burial disposing is necessary for maintaining the environment. In the current research, aluminum dross waste was utilized for preparing sintered Al/Al2O3 hybrid composites reinforced with different amounts of SiC and graphene up to 8 and 4 wt %, respectively. To obtain nanocomposite powders, aluminum dross and reinforcing materials were milled by high energy ball milling for 10 h. The particles' shapes and sizes of prepared nano powder were characterized by transmission electron microscope while the phase composition, crystallite size, lattice strain and dislocation density were investigated by X-ray diffraction technique. To fabricate sintered hybrid composites, the prepared nano powders were pressed and sintered at 1000 and 1200 °C. The physical properties in-terms of bulk density and apparent porosity of sintered composites were determined by liquid-displacement technique. The microstructure and phase composition were examined by scanning electron microscopy and X-ray technique, respectively. Furthermore, compressive strength, microhardness, wear resistance and dielectric properties were investigated in details. Also, pulse-echo technique was used to determine the elastic moduli. The results showed that the particle size of milled aluminum dross (Al/Al2O3) powder which contains 8 wt% SiC and 4 wt% graphene is 43.8 nm while its crystal size is equal 19.2 nm. Generally, all physical, mechanical and electrical properties were improved after increasing the sintering temperature from 1000 to 1200 °C and the reinforcement amounts. When this batch sintered at 1200 °C, the microhardness, compressive strength and elastic moduli increased by about 142.5, 44.8 and 46% while the wear rate was reduced by about 27% as compared to the composite that contain zero SiC and graphene. The increasing of SiC and graphene in Al/Al2O3 composites as well as sintering temperature led to positive effect on AC conductivity (σac), dielectric constant and dielectric loss.

Chemical reaction in Al matrix composite reinforced with SiCp coated by SnO2

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Degradation of SiC particles in aluminium-based composites

Active coatings for SiC particles to reduce the degradation by liquid aluminium during processing of aluminium matrix composites: study of interfacial reactions

Effect of Al2O3 addition on the microstructure and oxidation behavior of SiC coating prepared by pack cementation on C/C composites

Effect of Al2O3 addition on properties of non-sintered SiC–Si3N4 composite refractory materials

Interfacial reaction in Al2O3 fiber reinforced TiAl matrix composite

Influence of characteristic parameters of SiC reinforcements on mechanical properties of AlSi10Mg matrix composites by powder metallurgy

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

Effect of Impurity Elements on Displacement Reaction between Molten Al and SiO2 Designed for Utilization of Al Scrap

Effect of Zn and Mg additives on the fabrication of SiCp/Al2O3+Al composite by Directed Metal Oxidation (DIMOX) of aluminum

Recycling of MoSi2-based industrial solid wastes for the fabrication and high-temperature oxidation behavior of MoSi2–ZrSi2–SiC composite coating

Modify the interface between ex-situ γ-Al2O3 and Al matrix via in-situ coating in an Al matrix composite

Oxidation mechanism of Al–Si–SiC composite at elevated temperature

Improving thermal conductivity of Al/SiC composites by post-oxidization of reaction-bonded silicon carbide preforms

Effects of SiCnw/Al2O3 composite powders on properties of Al2O3–SiC refractory castables

Effects of Cr2O3 Content on Microstructure and Mechanical Properties of Al2O3 Matrix Composites

Pretreatment Process of SiC Particles and Fabrication Technology of SiC Particulate Reinforced Zn–Al Alloy Matrix Composite

Fabrication of Al/Al2O3/ SiC/graphene hybrid nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical properties

Mechanical Activation-Assisted Solid-State Aluminothermic Reduction of CuO Powders for In-Situ Copper Matrix Composite Fabrication

TECHNIQUES OF REVERSE REACTION SINTERED Si3N4/SiC COMPOSITES