Abstract:Antimony selenide (Sb 2 Se 3 ) thin films with cluster morphology were prepared using physical vapor deposition method combined with the post-annealing process. The composition and morphology of the prepared films were characterized by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy. Electrochemical analysis of the samples revealed that the Li/Sb 2 Se 3 half-cell exhibited an initial discharge specific capacity of 825.7 mAh∙g −1 at a current density of 0.5 C, and a discharge specific capacity of 1192.7 mAh∙g −1 after 100 charge-discharge cycles. The Sb 2 Se 3 film also displayed excellent rate characteristics and a high cycling performance with a high discharge specific capacity of 812.2 mAh∙g −1 at current density of 2 C after 600 charge-discharge cycles. Results obtained from the galvanostatic intermittent titration tests and from electrochemical impedance spectroscopy proved that the cluster structure of the thin film was beneficial to the ion transport characteristics, as well as for the rate performance of the Sb 2 Se 3 thin film materials. A quasi-solid-state battery based on Sb 2 Se 3 /Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 /LiFePO 4 was also assembled, which provided a discharge specific capacity of 445.5 mAh∙g −1 at 0.5 C with a capacity retention rate of 49.7% after 200 charge-discharge cycles. The results of this study clearly suggest that the use of Sb 2 Se 3 films as anode materials can provide promising results in the performance enhancement of quasi-solid-state Li-ion batteries.

Pulsed Laser Deposited Sb2Se3 Anode for Lithium-Ion Batteries

Physical vapor deposition of Sb 2 Se 3 films as high-performance anode materials in quasi-solid-state Li-ion batteries

Fabrication and Lithium Electrochemistry of Ag2Se Thin Film Anode

Lithium Electrochemistry of A Novel Snse Thin-Film Anode

Manganese Selenide Thin Films As Anode Material for Lithium-Ion Batteries

Nanocomposite SnO2–Se Thin Film As Anode Material for Lithium-Ion Batteries

Lithium Electrochemistry of NiSe2: A New Kind of Storage Energy Material

Pulsed Laser Deposited Heterogeneous Mixture of Li2Se–Sb2Se3 Nanocomposite As a New Storage Lithium Material

Fabrication and Lithium Electrochemistry of InSe Thin Film

Electrochemical lithiation and delithiation of FeSb2 anodes for lithium-ion batteries

Pulsed-Laser-Deposited Sn4p3 Electrodes For Lithium-Ion Batteries

Electrochemical Reactivity Mechanism of CuInSe2 with Lithium

Ga2se3 Thin Film As A Negative Electrode Material for Lithium-Ion Batteries

Pulsed-Laser-Deposited Sn[sub 4]P[sub 3] Electrodes for Lithium-Ion Batteries

High-performance Sb2S3/Sb Anode Materials for Li-ion Batteries

Electrochemical Properties of Snse Thin Film Electrode Fabricated by Pulsed Laser Deposition

Phenolic resin-derived carbon-confined strategy: Sb2Se3@C@CNTs-600 with ultra-high pseudocapacitive contribution as a superior lithium-ion battery anode

Bi3Se4 nanodots in porous carbon: A new anode candidate for fast lithium/sodium storage

Rational construction of Sb2Se3 wrapped bimetallic selenide as anode material toward efficient sodium storage performance

Electrochemical Behavior of Sb-Si Nanocomposite Thin Films As Anode Materials for Sodium-ion Batteries

Electrochemical Reactivity of Nanocomposite ZnO–Se for Lithium-Ion Batteries