Abstract:Phase equilibria in the Al2O3–Ta2O5 system have been studied by means of CO2 laser heater, high‐speed pyrometer, X‐ray powder diffraction, and scanning electron microscopy. The liquidus and invariant reaction temperatures in the whole composition region were measured by cooling trace tests. The monotectic reaction of Liquid 1→Liquid 2 + Al2O3 was determined to be at about 1547°C, but the typical microstructures for the miscibility gap were not directly observed in our experiments. The tetragonal AlTaO4 phases formed from as‐cast samples were found to congruently melt at 1669°C, and they could maintain stability during the cooling process but would gradually transform into orthorhombic and monoclinic polymorphs after heat treatment. Two eutectic reactions of Liquid → Al2O3 + T‐AlTaO4 and Liquid → T‐AlTaO4 + β‐Ta2O5 were measured to be at 1447°C and 36.7 mol%Ta2O5 and 1513°C and 63.5 mol% Ta2O5, respectively. Due to the undercooling effect, the invariant reaction temperatures determined by this work might be preliminary and need to be verified by more accurate methods. Our experiments confirmed that doping Al2O3 in Ta2O5 phases could improve phase stability of β‐Ta2O5. Finally, thermodynamic optimization of the Al2O3–Ta2O5 system was performed based on the obtained experimental data by means of the CALPHAD method. The self‐consistent thermodynamic parameters are helpful in further efforts for construction of Al2O3–Ta2O5‐based multicomponent thermodynamic database and the development of alumina–tantala‐based materials.

Metastable Crystalline Phases Formed in the Fe–Ta System by Solid-State Reaction

Structural phase transition in the Fe–Ta system studied by ion beam mixing

Stability of the metastable phases in the Co-Ta system studied by ab initio and thermodynamic calculations together with ion-beam-mixing experiment

The stability and homogeneity range of the TCP phases in the Co-Fe-Ta system

Metastable phase formation in an immiscible Cu-Ta system studied by ion-beam mixing, ab initio calculation, and molecular dynamics simulation

Phase equilibrium investigations of the Al2O3–Ta2O5 system: New experiments and thermodynamic modeling

Nonequilibrium Crystalline Phases Formed in the Co-Ta System by Ion-Beam Mixing

Phase Diagram and Annealing Effect for Fe1+δTe1−xSxsingle Crystals

Amorphous phase formation in the Ni–Ti–Ta system studied by thermodynamic calculation and ion beam mixing

In-situ observations of solidification process of Fe–Al–Ta eutectic alloy

Thermodynamic Assessments of Ti-Al, Ti-Fe, and Ti-Al-Fe Systems with Four-Sublattice Description of Ordered Body-Centered Cubic Phase and Density Functional Theory Data

First-principles calculations to investigate phase stability, elastic and thermodynamic properties of TiMoNbX (X=Cr, Ta, Cr and Ta) refractory high entropy alloys

Formation of A Hexagonal-Close-Packed Phase in Ni3r (R = Mo, Nb, Ta) Multilayered Films by Solid-State Reaction

Phase equilibria in Ni–Ti–Ta ternary system

Experimental Investigation of Phase Equilibria in the Co-Ta-Si Ternary System

Atomistic Modeling of Solid-State Amorphization in an Immiscible Cu-Ta System

Interface Stability and Solid-State Amorphization in an Immiscible Cu-Ta System

Ion Mixing to Synthesize Amorphous and Metastable Crystalline Alloys in the Fe-Ta System

Phase relationships and transformations in the ternary aluminum—titanium—tantalum system

Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel

Thermodynamic Assessment of Bio-Oriented Ti-Ta-Sn System