Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. Vibration and noise pollution is one of the main pollution in modern society. In order to obtain good vibration damping effect, more effective phononic crystals should be designed. Based on the theory of elastic wave propagation in solids, three types of phononic crystals are designed in this paper using tungsten blocks embedded in a rubber matrix, which are cup-shaped phononic crystal, solid cylindrical phononic crystal, and hollow cylindrical phononic crystal. Firstly, the band gap characteristics and vibration losses of the three phononic crystals are analyzed by using the finite element method. Secondly, the physical mechanism of band gap formation is explored by vibration modes. Finally, the cup-shaped phononic crystal was introduced into the core layer of the sandwich plate to form the cup-shaped phononic crystal sandwich plate, and its vibration damping performance was analyzed. The results show that the three phononic crystals can form three band gaps in the range of 0–800 Hz, and the first low-frequency band gap starts at about 140 Hz and is all wider than 200 Hz. It is noteworthy that the average loss of vibration transmission of the three types of phononic crystals is more than 69 dB, which possesses stronger damping capability and wider low- and middle-frequency band gaps than the flat plate type phononic crystals. The vibration direction of the phononic crystal is at an angle of 90° to the wave vector, which prevents the propagation of elastic waves. The phononic crystal embedded in the sandwich panel plate is more in line with the actual demand of vibration damping and obtains good vibration damping effect. The research in this paper can provide more feasibility for phononic crystal damping.

The Phononic Crystals and Automobile Vibration Noise Control

Interior Noise Reduction Scheme Based on Phonon Crystal and Its Defect Characteristics

An Investigation on Interior Noise Reduction Using 2D Locally Resonant Phononic Crystal with Point Defect on Car Ceiling

Study on broad flexural wave bandgaps of piezoelectric phononic crystal plates for the vibration and noise attenuation

Application Research of Phononic Crystals to Reduce Body Ceiling's Vibration

A locally-resonant phononic crystal for low-frequency vibration control of vehicles

Vibration Isolation and Noise Reduction Method Based on Phononic Crystal

Vibration Reduction of Car Body Based on 2D Dual-Base Locally Resonant Phononic Crystal

The application and research of sheet-shaped phononic crystals on body ceiling's vibration attenuation

Research on Multi-Band Structural Noise Reduction of Vehicle Body Based on Two-Degree-of-freedom Locally Resonant Phononic Crystal

Applications of the phononic crystal structures to the reduction of brake Noise

Research on Tunable Bandgap Characteristics of the Phononic Crystal Duct with Piezoelectric Thin Plates for the Broad Noise Reduction

Novel Acoustic Materials--Phononic Crystals

Acoustic Attenuation Characteristics of the Muffler Phononic Crystal with Hybrid Resonators

Application of Acoustic Metamaterials in Low-frequency Vibration and Noise Reduction

Acoustic and Aerodynamic Performances of One Phononic Crystal Duct with Periodic Mufflers

Theoretical and experimental study on the characteristics of wave propagation for one dimensional phononic crystal

The effects of viscoelastic material on the band gap of one-dimensional locally resonant phononic crystal

Vibrational loss analysis of a new type of phononic crystal with a tungsten block embedded inside a rubber matrix

SUPERFICIALLY ANALYZING THE APPLICATION OF THE SOUND INSULATION WITH PHONONIC CRYSTAL THEORY IN THE FIELD OF CONSTRUCTION

Design on multiple l-shaped antisymmetric low-frequency and wide babd gap vibration damping structure