Abstract:The interactions of femtosecond lasers with gold targets were investigated with a numerical method combining molecular dynamics (MD) and the two-temperature model (TTM). Previous works using MD-TTM method did not consider all the thermodynamic parameters and the interatomic potential dependent of the electron temperature simultaneously. Therefore, we developed a LAMMPS function to achieve this. To accurately capture the physics behind the interactions, we also included the electron blast force from free electron pressure and the modified Fourier law with steep electron temperature gradient in our model. For bulk materials, a stress non-reflecting and heat conducting boundary is added between the atomistic and the continuum parts. The modified boundary force in our study greatly reduces the reflectivity of the atomistic-continuum boundary compared with its original form. Our model is the first to consider all these factors simultaneously and manage to predict four femtosecond laser ablation phenomena observed in the experiments. In this dissertation, the thermodynamic parameters in the two-temperature model were extensively explored. We considered three different approaches to calculate these parameters: namely interpolation, ab initio calculation, and analytical expression. We found that simple interpolation between solid state and plasma state could lead to high level of inaccuracy, especially for electron thermal conductivity. Therefore, ab initio calculation and analytical expression were used for the calculation of the thermodynamic parameters in more advanced studies. The effects of electron thermal conductivity and electron-phonon coupling factor on electron and lattice temperatures were analyzed.Our studies considered electron temperature dependent (ETD) and electron temperature independent (ETI) interatomic potentials. The ETI interatomic potential is easier to implement and therefore it is used in our phase change study to investigate the effects of target thickness on melting. Homogeneous melting occurred for thin films, while melting can be observed through the movement of the solid-liquid interface in thick or bulk materials. However, the ETI potential overestimated the bond strength at high temperatures. Therefore, ablation process was studied with the ETD potential. Three ablation mechanisms were found in our simulations at different laser fluences. Short nonthermal ablation was only observed at the ablation threshold. With increasing laser fluence, spallation was then seen. In high laser fluence regime, phase explosion occurred on the surface and coexisted with spallation.Lastly, we researched on the effects of the delay time between two femtosecond laser pulses. Various delay times did not have much influence on melting depth. In low laser fluence regime, with increasing delay time, the target went through nonthermal ablation, to spallation and to no ablation. In high laser fluence regime, longer delay time encouraged phase explosion while suppressed spallation.

A thermal-controlling mechanism for laser ablation of a colossal magnetoresistant oxide target

Angle- and Time-Resolved Mass Spectrometric Study on Pulsed Laser Ablation of an La-Ca-Mn-O Target

Characterization of laser ablated species from a La–Ca–Mn–O target by angle- and time-resolved mass spectrometry

A Time-Resolved Quadrupole Mass Spectrometric Study on 355 Nm Laser Ablated Species Ejected from LiMn 2 O 4

Angular Distribution Of Laser-Ablated Species From A Pr0.67sr0.33mno3 Target

Spectroscopic Characterization of Laser-Ablated Plume from A La-Ca-Mn-O Target in an O-2 Ambient

Thermal regime and effect studying on the ablation process of thin films prepared by nanosecond pulsed laser

Kinetic Evolution of Laser Ablating Alloy Materials

Molecular Dynamics Simulation Of Ultra-Fast Thermal Transition In Thin Foil Irradiated By High Power Ultra-Short Laser

An Angle-Resolved Time-of-flight Mass Spectrometric Study of Pulsed Laser Ablated Ta2O5

Mass, velocity and angular distributions of the species ejected from laser ablation of LiCoO2

Velocity Distributions of Laser Ablated Species from a La0.67Ca0.33MnO3 Target

Time-Resolved Quadrupole Mass Spectrometric Studies on Pulsed Laser Ablation of TiO2

An Atomic-Level Study of Material Ablation and Spallation in Ultrafast Laser Processing of Gold Films

An Optical Emission Spectroscopic Study on Visible Laser Ablation of Ta2O5 in Ambient O2

Laser–target interaction during high-power pulsed laser deposition of superconducting thin films

Temperature and Mechanics Effect Measurement of Plasma Induced by Laser Ablating Hard Aluminum

Subpicosecond laser ablation behavior of magnesium target and crater evolution: Molecular dynamics study and experimental validation

PHASE CHANGE AND ABLATION STUDY OF METALS BY FEMTOSECOND LASER IRRADIATION USING HYBRID TTM/MD SIMULATIONS

An Angle-resolved TOF Study on the UV Laser Ablation of Tantalum Oxide

A quadrupole mass spectrometric study on pulsed laser ablation of Y1Ba2Cu3O7-delta