Abstract:To address the deterioration of workshop air quality due to free emission of unorganized fumes from multiple surface sources of residual anode carbon blocks during electrolytic cell opening and anode changing operations, new unorganized fumes collecting equipment based on negative pressure suction was designed. Take a workshop as an example, by the CFD coupled DPM simulation method for unorganized fumes, the influence of the negative pressure P of the fan, and the distance h between the upper surface of the residual carbon block and the exhaust hood on the collection efficiency was investigated. The results showed that the collection efficiency of flue gas and dust increased with the increase in negative pressure and increased at first and then decreased with the rise in the distance between the upper surface of the residual carbon block and the exhaust hood. The collection efficiency of flue gas and dust was the highest when the negative pressure was 5000 Pa, and the distance was 176 mm; at this time the collection efficiency of flue gas was 85.06%, and the dust was 72.58%. Further, validation tests in practical applications were carried out. The experimental results consistently demonstrate that the established CFD coupled DPM simulation method had a good agreement with the experimental results. The error of flue gas collection efficiency was less than 3.1%, and the error of dust collection efficiency was less than 1.2%. The research conducted had critical engineering application values for achieving high cleanliness and low energy consumption operation of unorganized fumes.

The application of numerical simulation to energy saving and emission reduction reformation of aluminum reduction cells

Numerical Simulation and Application on Thermal-electric Field of A Quarter of Aluminum Reduction Cell

Numerical Simulation Study on Gas Collecting System of 400 kA Grade Aluminum Electrolytic Cell

Performance study of a new type of collection equipment for unorganized fumes from aluminum electrolysis

Simulation and Analysis for a Heat Recycle System on the Sidewall of Aluminum Reduction Cells

A Numerical Simulation to Thermal Field and Stress Field of Aluminum Cell Cathode and Anode

Numerical Calculations of the 3-D Electromagnetic Fields of Aluminum Reduction Cells Based on ANSYS Program

Simulation and Application of a New Type of Energy-Saving Steel Claw for Aluminum Electrolysis Cells

Numerical Simulation of Current and Temperature Fields of Aluminum Reduction Cells Based on ANSYS

Numerical Modeling of Current Efficiency in Large-scale Aluminum Reduction Cells

Numerical Investigation on Side Heat Transfer Enhancement in 300 Ka Aluminum Reduction Cell

Numerical simulation of current field in aluminum reduction cells using erm and fem

Magnetic Field Simulation and Design of Stationary Stream Pattern Aluminum Reduction Cell

3D Thermo-electric Coupling Analysis of Aluminum Reduction Cell

Numerical Simulation of Prebaked Anode Current and Temperature Fields of Aluminum Reduction Cell

Influences of various aluminum accumulation sump designs on thermal stress distribution in drained aluminum reduction cell

Coupled Computation Method of Physics Fields in Aluminum Reduction Cells

Development and application of integrated technology of current-intensifying and high-efficiency energy-saving for aluminium reduction

Experimental Aluminum Reduction Cell with Suspended Cathode and Finite Element Analysis of Its Current Field

Numerical Simulation of Unsteady Thermal Process in Cylindrical Aluminum Melting Furnace

Comparison of some different cathode collector bars through numerical simulation