Abstract:The present study describes the influence of the mutual effect of damage accumulation on the stress fields at the central crack tip in the plate subjected to uniaxial tension. The objective of the study is to analyze the cracked plate experiencing uniaxial loading under creep conditions using the CAE software SIMULIA ABAQUS taking into account the damage accumulation processes near the crack tip. Computations were performed by means of the user procedure UMAT (User material), which is based on the Bailey-Norton creep power law and the Kachanov — Rabotnov damage evolution equation describing the power-law damage accumulation processes. The analysis of the obtained results showed that in the creep and elasticity zones, in computations without taking into account the damage effect, there are asymptotics of stress fields that correspond to well-known analytical solutions of fracture mechanics (Hutchinson — Rice — Rosengren asymptotics for the creep zone, the asymptotics of linear fracture mechanics corresponding to the stress dependence. inversely proportional to the square root of the distance from the tip of the crack – for the zone of elastic behavior of the material. The presence of damage in the cracked specimen affected the asymptotic behavior of the crack tip fields. It is felt that the proposed procedure could pave the way for the analytical solution of the boundary value problem and allow us to determine the structure of the asymptotic solution of the problem. The finite element analysis clearly shows that the process of damage accumulation affects the change in the asymptotic behavior of the stress field in the vicinity of the crack tip and leads to a new asymptotic distribution of the stress tensor components. The proposed procedure can pave the way to an analytical solution of the boundary value problem and allow us to determine the structure of the asymptotic solution of the problem.

Surface Effects on Time-Dependent Fracture Parameter of Subsurface Crack in Plates under Tension

Creep fracture parameter C* solutions for semi‐elliptical surface cracks in plates under tensile and bending loads

Interaction between rectangular cracks embedded in infinite medium

Surface effects on mode-I crack tip fields: A numerical study

Numerical Investigations on the Effects of T-stress in Creep Crack

Numerical Investigations on the Effects of T-Stress in Mode I Creep Crack

Effects of T-Stress on Fracture Behavior of Central-Cracked Stiffened Plate

Surface Effects on the Near-Tip Stress Fields of a Mode-Ii Crack

Surface Effects on the Near-Tip Stresses for Mode-I and Mode-III Cracks

Unified creep constraint parameter solutions for surface cracks in plates under tensile and bending loads

A new creep-fatigue crack growth model and a correlation of the creep-fatigue crack growth rate with unified constraint parameter

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Novel semi-analytical model for solving the C *-integral of specimens with mode-I crack under various constraints

Numerical evaluation of stress intensity factors and T-stress for interfacial cracks and cracks terminating at the interface without asymptotic enrichment

Effects of nonproportional loading and residual stress on creep crack tip fields

Characterization of Mismatch Constraint Effect for the Central Crack Plate under Biaxial Loading

The Interacting Effect for Collinear Cracks Near Mismatching Bimaterial Interface under Elastic Creep

An Analytical Method for Predicting Direct Tensile Creep Fracture in Brittle Solids Containing Initial Microcracks

Effects of Surface Elasticity on Mixed-Mode Fracture

Influence of the process of damage accumulation on the asymptotic behavior of stress fields under creep conditions of a sample with a central crack