Abstract:In this paper, an ordered mesoporous alumina coating was prepared and applied to capillary microextraction (CME) of trace Co, Ni and Cd for the first time. The coated capillary was used for on-line coupling CME with inductively plasma mass spectrometry (ICP-MS) for the determination of trace metals of Co, Ni and Cd. The porous structure of Al2O3 coating was examined by SEM and TEM. The effects of the extraction parameters including pH, sample flow rate and volume, elution solution and interfering ions on the recovery of analytes have been investigated and optimized. Under the optimized conditions, the limits of detection were 0.33, 1.5 and 1.4ngL−1 for Co, Ni and Cd, respectively, with a preconcentration factor of 10 times. The precisions for all investigated elements were 2.7, 4.1 and 2.5% (c=0.05ngL−1, n=7), for Co, Ni and Cd, respectively, and the sample frequency was 8h−1.The proposed method was successfully applied for the analysis of trace metals in water, rice and urine samples with the recovery of 94–105%. In order to validate the proposed method, two certified reference materials of GBW 0913 human urine and NIES No.10-b rice flour were analyzed, and the determination values are in good agreement with the certified values. The ordered mesoporous Al2O3 coated capillary can be used more than 20 times without decreasing the extraction efficiency.

Coupling On-Line Preconcentration by Ion-Exchange with Microwave Plasma Torch-Atomic Emission Spectrometry for the Determination of Cobalt and Nickel

Some Observations on the On-Line Anion-Exchange Preconcentration for Microwave Plasma Torch Atomic Emission Spectrometry

Cobalt determination by means of flow injection on-line sorbent preconcentration-flame atomic absorption spectrometry with 1-nitroso-2-naphthol as a complexing reagent

On-line Preconcentration of Trace Nickel from Electrolytic Manganese Using Minicolumn Packed Activated Carbon for Electrothermal Atomic Absorption Spectrometry

Preconcentration of nickel in multi-walled carbon nanotubes pretreated with potassium permanganate for use as solid-phase extraction adsorbent and determination by flame atomic absorption spectrometry

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Simultaneous On-Line Preconcentration and Determination of Trace Metals in Environmental Samples by Flow Injection Combined with Inductively Coupled Plasma Mass Spectrometry Using a Nanometer-Sized Alumina Packed Micro-Column

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Cobalt determination with FI-FAAS after on-line sorbent preconcentration using 1-nitroso-2-naphthol.

Flame Atomic Absorption Spectrometric Determination of Cobalt in Biological Materials Using a Flow-Injection System with On-Line Preconcentration by Ion-Pair Adsorption

Nanometer-size Titanium Dioxide Microcolumn On-Line Preconcentration of Trace Metals and Their Determination by Inductively Coupled Plasma Atomic Emission Spectrometry in Water

Microwave Plasma Torch-Atomic Emission Spectrometry for the On-Line Determination of Rare Earth Elements Based on Flow Injection Preconcentration by Tio2-Graphene Composite

On-line Preconcentration and Determination of Trace Metals in Water Samples by Flow Injection Combined with Flame Atomic Absorption Spectrometry via Calix[4]arene Carboxylic Acid Packed Micro-column

A New Method for the Determination of Trace-level Cu2+ Based on Flow-Injection on-line Preconcentration and Microwave Plasma torch-atomic Emission Spectrometry

Uv Photochemical Vapor Generation and in Situ Preconcentration for Determination of Ultra-Trace Nickel by Flow Injection Graphite Furnace Atomic Absorption Spectrometry

Fundamental and practical considerations in the design of on-line column preconcentration for flow-injection atomic spectrometric systems

On-line Preconcentration and Separation of Co, Ni and Cd Via Capillary Microextraction on Ordered Mesoporous Alumina Coating and Determination by Inductively Plasma Mass Spectrometry (ICP-MS).

On-line Flow Injection Solvent Extraction for Electrothermal Atomic Absorption Spectrometry: Determination of Nickel in Biological Samples

Ultrasensitive Determination of Cobalt and Nickel by Atomic Fluorescence Spectrometry Using Apdc Enhanced Chemical Vapor Generation

Determination of Ni, Cu and Hg by flow injection preconcentration coupled with HPLC