Abstract:The multiphase material developed through self‐assembly engineering exhibits a high oxygen vacancy concentration. This consequently enhances its proton defect formation and transport with a low enthalpy of protonation reaching −30 ± 9 kJ mol−1. The peak power density of the single cell reaches 1054 mW cm−2 at 650 °C with good operation stability spanning over 500 h at 550 °C. Triple ionic and electronic conductivity (TIEC) in cathode materials for protonic ceramic fuel cells (PCFCs) is a desirable feature that enhances the spatial expansion of active reaction sites for electrochemical oxygen reduction reaction. The realization of optimal TIEC in single‐phase materials, however, is challenging. A facile route that facilitates the optimization of TIEC in PCFC cathodes is the strategic development of multiphase cathode materials. In this study, a cubic‐rhombohedral TIEC nanocomposite material with the composition Ba(CeCo)0.4(FeZr)0.1O3−δ (BCCFZ) is designed via self‐assembly engineering. The material consists of a mixed ionic and electronic conducting phase, BaCo1−(x+y+z)CexFeyZrzO3−δ (M‐BCCFZ), and a dominant proton‐conducting phase, BaCe1−(x+y+z)CoxZryFezO3−δ (H‐BCCZF). The dominant cerium‐rich H‐BCCFZ phase enhances the material's oxygen vacancy concentration and the proton defects formation and transport with a low enthalpy of protonation of −30 ± 9 kJ mol−1. The area‐specific resistance of the BCCFZ symmetrical cell is 0.089 Ω cm2 at 650 °C in 2.5% H2O‐air. The peak power density of the anode‐supported single cell based on BCCFZ cathode reaches 1054 mW cm−2 at 650 °C with good operation stability spanning over 500 h at 550 °C. These promote BCCFZ as a befitting cathode material geared toward PCFC commercialization.

Development of Mixed-Conducting Ceramic Materials

Progress and application on oxygen ion-electronic mixed conductors oxygen-permeable membrane

Ceramic Materials for Solid Oxide Fuel Cell

Materials Design for Ceramic Oxygen Permeation Membranes: Single Perovskite Vs. Single/double Perovskite Composite, a Case Study of Tungsten-Doped Barium Strontium Cobalt Ferrite

Gadolinium-Doped Ceria–NaCoO2 Heterogeneous Semiconductor Ionic Materials for Solid Oxide Fuel Cell Application

Machine‐Learning‐Accelerated Development of Efficient Mixed Protonic–Electronic Conducting Oxides as the Air Electrodes for Protonic Ceramic Cells

Preparation and Characterization of Mixed-Conducting Thin Tubular Membrane

Preparation and Characterization of Porous La0.6Sr0.4Co0.2Fe0.8O3- Ceramics

A fast ceramic mixed OH−/H+ ionic conductor for low temperature fuel cells

Fabrication Of High Performance Oxygen Sensors Using Multilayer Oxides With High Interfacial Conductivity

The CO2 electrolysing mechanism in single-phase mixed-conducting cathode of solid oxide cell

Preparation and characterization of porous lao.eSro-4Coo-4Feo.gOa-j ceramics

Ceramic membrane fuel cells based on solid proton electrolytes

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Research Progress and Materials Selection Guidelines on Mixed Conducting Perovskite-Type Ceramic Membranes for Oxygen Production

Ba(Sr) Zr(CoFe) O 3-particle-dispersed Ba 0.5Sr 0.5Co 0.8Fe 0.2O 3-δ mixed conductor composite

Bridging Interparticle Li + Conduction in a Soft Ceramic Oxide Electrolyte

A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

Electrokinetic Insights into the Triple Ionic and Electronic Conductivity of a Novel Nanocomposite Functional Material for Protonic Ceramic Fuel Cells

Novel Approach for Developing Dual-Phase Ceramic Membranes for Oxygen Separation through Beneficial Phase Reaction

Development of a Core-Shell Heterojunction TiO2/SrTiO3 Electrolyte with Improved Ionic Conductivity