Abstract:Here, the effect of temperature on the electrochemical corrosion of 316L stainless steel (SS) in methyl diethanolamine (MDEA) solution with/without 1.0 wt.% NaCl in the presence/absence of CO2 was investigated using potentiostatic polarization, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). The electrochemical measurements showed that although the MDEA solution was highly basic, both chloride and temperature played greater roles in the pitting corrosion of 316L SS, similar to plain NaCl solution. The critical pitting temperature (CPT) of 316L SS in MDEA solution with 1.0 wt.% NaCl decreased from 67.2 oC to 59.6 oC, and the breakdown potential underwent a negative shift of approximately 400 mV, and the EIS Bode impedance decreased. Furthermore, the breakdown potential shifted negatively with increasing temperature when the temperature was lower than CPT in the MDEA solution containing Cl−; however, the breakdown potential decreased slowly, and its temperature dependence was unclear when the temperature was higher than the CPT. In addition, the passive film resistance of 316L SS in all MDEA solutions decreased as the temperature increased. Particularly for the MDEA solution containing Cl−, the passive film resistance decreased by one order of magnitude when the temperature increased from 50 °C to 60 °C. Although the presence of CO2 in the MDEA solution decreased the passive film resistance, it seemed to reduce the individual corrosion contribution of Cl−. The pitting corrosion process of 316L SS in MDEA solution containing chloride ions was discussed by combining these results with classical pitting mechanisms of stainless steel.

CORROSION BEHAVIOR OF 304 STAINLESS STEEL IN NaCl-(NH4)2SO4-NH4Cl SOLUTIONS

CORROSION BEHAVIOR OF STAINLESS STEEL 304 AS WATER SUPPLY MATERIAL IN WATER CONTAINING CHLORIDE

Electrochemical Study on the Impact of Nacl Impurity on Corrosion of Stainless Steel 316l in Molten Nitrate Salts for Thermal Energy Storage

Impact of NaCl impurity on corrosion of 316 L steel in molten nitrate salts for thermal energy storage: An electrochemical study

Corrosion Behaviors of Fe-22Cr-16Mn-0.55N High-Nitrogen Austenitic Stainless Steel in 3.5% NaCl Solution

Electrochemical corrosion and passive behavior of a new high-nitrogen austenitic stainless steel in chloride environment

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Corrosion resistance of Cu‐bearing 316L stainless steel tuned by various passivation potentials

Effect of Chloride Ion Concentration on the Corrosion Behavior of 304 Stainless Steel Used in the Electric Water Heater

Corrosion mechanism of additively manufactured 316 L stainless steel in 3.5 wt.% NaCl solution

Passivation behavior and surface chemistry of 316 SS in the environment containing Cl− and NH4+

Effect of temperature on the electrochemical pitting corrosion behavior of 316L stainless steel in chloride-containing MDEA solution

Effects of surface treatments on the corrosion and erosion-corrosion of 304 stainless steel in 3.5% NaCl solution

Effect of Long-Term Immersion on the Corrosion and Passivation Behavior of Lean Duplex Stainless Steel 2101 in 3.5 wt% NaCl Solution

Corrosion Behaviors of TWIP Steels in NaCl Solution

Corrosion behavior and mechanism of 316 stainless steel in NaCl-KCl-ZnCl2 molten salts at high temperature

ELECTROCHEMICAL FEATURES OF THE CORROSION OF AN ALUMINUM-LITHIUM ALLOY IN 3.0% NaCl SOLUTION

Corrosion behaviors and protective layer stabilization mechanism of 316 stainless steel in NaCl–KCl–NaF reciprocal salts at high temperatures

Electrochemical corrosion behavior of stainless steel in dilute hydrochloric acid media containing SO4 2- ions

Corrosion Behaviour of T92 Steel in NaCl Solution

Influences of Ph Value, Temperature, Chloride Ions and Sulfide Ions on the Corrosion Behaviors of 316L Stainless Steel in the Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell