Abstract:A portable and low-cost miniaturized analysis system was proposed, in which microchip electrophoresis (MCE) and chemiluminescence (CL) were used as the separation and detection units, respectively. A porous monolithic plug was created in the separation channel of the microchip as a select valve, which prevented the pressure-driven CL reagents flowing back into the separation channel but allowed electrophoretic migration along the separation channel. The sensitivity was greatly enhanced by improving the mixing efficiency using a spiral detection channel with an increased length facing the photomultiplier tube (PMT). Peak width could be significantly reduced by increasing the flow rate of CL reagents. Putting grounding electrode before the detection channel significantly improved the reproducibility. A simple and compact subatmospheric pressure fluid-driven device was developed for manipulating the whole analytical process, including variable-volume sample loading, electrophoretic separation and CL reagents transportation. All miniaturized components for constructing a portable MCE-CL system are commercially available. This approach considerably simplified the operation and equipments for constructing an efficient MCE-CL system. Nine metal cations, such as Cr(III), Co(II), Cu(II), Ni(II), Au(III), Mn(II), Zn(II), Pt(II), Pb(II) were successfully separated within 200 s. Migration time precisions ranging from 0.39% for Cr(III) to 2.1% for Cu(II) were obtained for ten consecutive determinations with peak height precisions from 1.67% for Co(II) to 5.73% for Pb(II). Detection limits ranging from 7.5 x 10(-11) mol L(-1) for Co(II) to 8.3 x 10(-9) mol L(-1) for Pb(II) were achieved, which were about three orders lower than the present MCE-CL system. It has been applied for the determination of metals in tea. The results with the recoveries from 97.0% to 102.3% proved that the proposed MCE-CL system offers a number of benefits including miniaturization, high sensitivity and better resolution.

An Extremely Stable and Sensitive End-Column Electrochemical Detector Based on Heated Copper Microdisk Electrode with Direct Current for Ce and Ce-Chip

Efficient ABEI-Dissolved O<sub>2</sub>-Ce(III, IV)-MOF Ternary Electrochemiluminescent System Combined with Self-Assembled Microfluidic Chips for Bioanalysis

A high-performance polycarbonate electrophoresis microchip with integrated three-electrode system for end-channel amperometric detection.

An End-Channel Amperometric Detector for Microchip Capillary Electrophoresis

Microchip capillary electrophoresis with solid-state electrochemiluminescence detector.

Electrochemical Detection Modes for Microchip Capillary Electrophoresis

Microchip Capillary Electrophoresis With An End-Channel Amperometric Detector And Its Preliminary Application

Microchip Capillary Electrophoresis with an Integrated Indium Tin Oxide Electrode-Based Electrochemiluminescence Detector.

Electrochemical Detector Based on Sol‐gel‐derived Carbon Composite Material for Capillary Electrophoresis Microchips

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

Microchip Capillary Electrophoresis Coupled with an End-Column Electrochemiluminescence Detection.

3D printed cartridge for high-speed capillary electrophoresis with sheath liquid thermostatting and contactless conductivity detection

Study of Capillary Electrophoresis Chip with Conductivity Detection

Fabrication and Performance of A Three-Dimensionally Adjustable Device for the Amperometric Detection of Microchip Capillary Electrophoresis

Electrochemical Detector for Microchip Electrophoresis of Poly(dimethylsiloxane) with a Three-Dimensional Adjustor.

Capillary electrophoresis microchip with a carbon nanotube-modified electrochemical detector.

Design of movable contactless conductivity detector for microchip capillary electrophoresis

New Capillary Electrophoresis-Electrochemiluminescence Detection System Equipped With An Electrically Heated Ru(Bpy)(3)(2+)/Multi-Wall-Carbon-Nanotube Paste Electrode

Carbon nanotube/poly(methyl methacrylate) (CNT/PMMA) composite electrode fabricated by in situ polymerization for microchip capillary electrophoresis.

An integrated capillary electrophoresis-amperometric detection chip with replaceable and quasi-self-aligned working electrode

An Electrically Heated Au Electrode for Electrochemical Detection in Microchip System