Abstract:A portable and low-cost miniaturized analysis system was proposed, in which microchip electrophoresis (MCE) and chemiluminescence (CL) were used as the separation and detection units, respectively. A porous monolithic plug was created in the separation channel of the microchip as a select valve, which prevented the pressure-driven CL reagents flowing back into the separation channel but allowed electrophoretic migration along the separation channel. The sensitivity was greatly enhanced by improving the mixing efficiency using a spiral detection channel with an increased length facing the photomultiplier tube (PMT). Peak width could be significantly reduced by increasing the flow rate of CL reagents. Putting grounding electrode before the detection channel significantly improved the reproducibility. A simple and compact subatmospheric pressure fluid-driven device was developed for manipulating the whole analytical process, including variable-volume sample loading, electrophoretic separation and CL reagents transportation. All miniaturized components for constructing a portable MCE-CL system are commercially available. This approach considerably simplified the operation and equipments for constructing an efficient MCE-CL system. Nine metal cations, such as Cr(III), Co(II), Cu(II), Ni(II), Au(III), Mn(II), Zn(II), Pt(II), Pb(II) were successfully separated within 200 s. Migration time precisions ranging from 0.39% for Cr(III) to 2.1% for Cu(II) were obtained for ten consecutive determinations with peak height precisions from 1.67% for Co(II) to 5.73% for Pb(II). Detection limits ranging from 7.5 x 10(-11) mol L(-1) for Co(II) to 8.3 x 10(-9) mol L(-1) for Pb(II) were achieved, which were about three orders lower than the present MCE-CL system. It has been applied for the determination of metals in tea. The results with the recoveries from 97.0% to 102.3% proved that the proposed MCE-CL system offers a number of benefits including miniaturization, high sensitivity and better resolution.

Fabrication and Performance of A Three-Dimensionally Adjustable Device for the Amperometric Detection of Microchip Capillary Electrophoresis

A three-dimensionally adjustable amperometric detector for microchip electrophoretic measurement of nitroaromatic pollutants

A high-performance polycarbonate electrophoresis microchip with integrated three-electrode system for end-channel amperometric detection.

An End-Channel Amperometric Detector for Microchip Capillary Electrophoresis

Electrochemical Detector for Microchip Electrophoresis of Poly(dimethylsiloxane) with a Three-Dimensional Adjustor.

Miniaturized Ce System Based on Amperometric Detection and Horizontal Sampling

Microchip Capillary Electrophoresis With An End-Channel Amperometric Detector And Its Preliminary Application

Fabrication of a Magnet-Assisted Alignment Device for the Amperometric Detection of Capillary Electrophoresis Using a Carbon Nanotube/polypropylene Composite Electrode.

Carbon nanotube/poly(methyl methacrylate) (CNT/PMMA) composite electrode fabricated by in situ polymerization for microchip capillary electrophoresis.

A dynamically modified microfluidic poly(dimethylsiloxane) chip with electrochemical detection for biological analysis.

Movable Contact Less-Conductivity Detector for Microchip Capillary Electrophoresis

Detection of Inorganic Ions on a Capillary Electrophoresis Microchip Using a Conductivity Technique

Capillary electrophoresis microchip with a carbon nanotube-modified electrochemical detector.

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

An integrated capillary electrophoresis-amperometric detection chip with replaceable and quasi-self-aligned working electrode

Electrochemical Detection Modes for Microchip Capillary Electrophoresis

Microchip capillary electrophoresis with solid-state electrochemiluminescence detector.

Microchip Capillary Electrophoresis with A Boron-Doped Diamond Electrochemical Detector for Analysis of Aromatic Amines

Use of 3D printing to integrate microchip electrophoresis with amperometric detection

Microchip Separation and Electrochemical Detection of Amino Acids and Peptides Following Precolumn Derivatization with Naphthalene-2,3-dicarboxyaldehyde

3D-Printed Microfluidic Device with In-line Amperometric Detection that Also Enables Multi-Modal Detection