Abstract:Inner Mongolia power grid is the key area of wind generator development in China, in which double fed wind turbine assembly accounts for a large proportion. Based on the principle of variable speed constant frequency operation and PQ decouphng control of double fed wind turbine, the basic principle of mechanical and electrical simulation modeling of double fed wind turbine is given by combining the measured characteristics and theoretical analysis: the control command is directly converted into the rotor DQ current of the generator, and then through the motor model and the grid interface, the normal control and low through control are paralleled, through the voltage drop by switching. On the basis of DQ decoupling control, a decoupling identification method of active power and reactive power low ride through characteristics for different faults is proposed. The parameters of the LVRT model can be identified by using the test data of the unit. In this paper, the method is used to identify the typical measured data, and the normal control model parameters and low penetration control model are obtained, and the correctness of the identification method is verified through the verification of the measured data and the curve comparison.

Numerical Calculation of Transient Eddy Current Fields and Electromagnetic Forces Acting on End Winding of Large Turbogenerators

Study on Electromagnetic Forces of End Windings in Large Turbo-Generators

3D finite element study of transient electromagnetic forces acting on the stator end-windings of a large turbo-generator

Analysis of Magnetic-Thermal Coupled Fields in the End Region of Large Turbine-Generators

3-D Eddy Current Analysis in the End Region of a Turbogenerator by Using Reduced Magnetic Vector Potential

3D Eddy Current and Temperature Field Analysis of Large Hydro-Generators in Leading Phase Operations

The Numerical Analysis Of Ventilation And Temperature Fields For A Bulb Tubular Turbine Generator

Full 3D eddy current and temperature field analysis of large hydro-generators in different operating conditions

Negative Sequence Eddy Current Field Analysis of a 1055 MVA Turbogenerator by Using 3D Finite Element Methods

Numerical Calculations of the Coupled Eddy Current-Temperature Fields in the End Regions of Large Hydro-Generator Using MagNet and ThermNet Software

Coupled field finite element analysis for turbine generator under loss-of-excitation asynchronous operation

The Electromagnetic Field Analysis of Permanent Magnet Synchronous Generator Based on ANSYS

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

Computation of transient electromagnetic torque in a turbogenerator under the cases of different sudden short circuits

Characteristics of Air Gap Magnetic Fields in Inter Turn Field Winding Short Circuit of Large Turbo Generator

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Modeling Principle and Parameter Identification of Double Fed Wind Turbine for Electromechanical Transient Simulation of Power System

The dynamic performance and temperature distribution of turbine generator under loss of excitation by using coupled FE analysis

Study on the Electromagnetic Field and Losses in the End Zone of Large Hydraulic Generators by FEM

Dynamic Modeling and Simulation of Doubly-Fed VSCF Wind Generator Based on PSCAD/EMTDC