Abstract:Doubly fed induction generators (DFIGs) are negatively affected by the inter-turn short-circuit fault of rotor windings, so for continuous and safe operation of the wind turbine, it is important to examine the DFIGs. For this purpose, a finite element method (FEM) based model has been designed to check the behavior of the generator under normal and inter turn short circuit fault condition in the rotor windings. In this paper, a fieldcircuit coupled model of machine was designed using ANSYS Maxwell 2D. The circuit is modeled by a small elements mesh. Three phase AC current source is provided to the rotor windings and the excitations on rotor winding side are set in the external circuit. The stator and rotor slot number are 72/60 and number of turns per phase for stator and rotor are 228/100. The outer diameter of stator is 520mm and the inner diameter is 350mm. The outer diameter of rotor is 346.6mm and the inner diameter is 110mm. Different rotor inter turn short circuit fault conditions are accomplished by reducing the number of turns in rotor slot. Based on the simulation, it was found that phase difference and positive and negative sequence of current analysis were effective methods to diagnosis the rotor inter turn short circuit fault. During the normal operation, all the three phases are equally distributed and are 120° degrees apart and start to distracted from 120° degree when inter turn short circuit happened. Under normal condition, the negative sequence of current is low. However, as the fault degree enlarges, negative sequence of current becomes larger, thus ratio of negative to positive sequence of current also increases. The simulation results illustrate that the analysis done in this paper is quite appropriate as desired, also proposed technique is advanced in wind turbines.

Characteristics of Air Gap Magnetic Fields in Inter Turn Field Winding Short Circuit of Large Turbo Generator

Harmonic Analysis of Short Circuit Air Gap Magnetic Field in Interturn Field Winding of Large Turbo Generator

Online Monitoring of Inter-turn Short Circuit Fault of Field Winding in Large Turbo-generator

Model parameter identification of DFIG based on short circuit current

Online Identification Methodology of Field Winding Short Circuit Fault of Turbogenerator

Fault Diagnosis of Inter-turn Short Circuit in Rotor Winding of Doubly-fed Generator Based on Data Fusion of Multi-flux Sensors

3D finite element study of transient electromagnetic forces acting on the stator end-windings of a large turbo-generator

Computation of transient electromagnetic torque in a turbogenerator under the cases of different sudden short circuits

A Study of Armature Winding Internal Faults for Turbogenerators

Study on the Characteristics of Turn-to-Turn Short Circuit Faults in the Primary Windings of the Generator Terminal Voltage Transformer

A study of armature winding internal faults and protection schemes for turbogenerators

Transient Process Analysis of Multi-Physical Parameters of Turbine Generator During Out of Phase Synchronization Fault

Analysis and Simulation on the Effect of Rotor Interturn Short Circuit on Magnetic Flux Density of Turbo–Generator

Fault diagnosis of inter-turn short circuit in turbogenerator rotor windings based on vibration-current signal fusion

Electromagnetic Torque of Synchronous Generator with Inter-turn Short Circuit in the Field Winding

Three-dimensional Finite Element Analysis of Electromagnetic Forces Acting on the End Winding of Large Turbo-Generator

Math Model and Fault Characteristics of Field Winding Inter-turn Short Circuit of Synchronous Generator

Detection of Shorted Turns in the Field Winding of Turbo Generators during Turning Gear Mode

Influence of Inter-turn Short-Circuit Fault Considering Loop Current on Electromagnetic Field of High-Speed Permanent Magnet Generator with Gramme Ring Windings

Detection of Rotor Inter-turn Short Circuit Fault in Doubly-fed Induction Generator Using FEM Simulation

Simulation Research on Inter-Turn Short Circuits of Field Windings in Synchronous Machines