Abstract:To achieve integrally stiffened tubular component, a new technology named as hydro-assisted forming was put forward, which successfully realized integral component forming. Experiment and finite element simulation were conducted to explore the practicality and formability of stiffened tube hydro-assisted forming. Based on plastic mechanics, the critical mechanics condition was analyzed and given. At last, the shape error and thickness distribution were given in detail. The results indicate that internal pressure induces not only tensile hoop stress but also "backward" bending moment, which are useful to eliminate wrinkle defect. But it is worthwhile to note that buckling defect would happen if the internal pressure was too high due to the effection of rib initial deflection. Shape accuracy is sensitive to internal pressure. Geometric error decreases as internal pressure, but increases after the internal pressure reaches a certain degree. Both welding residual stress and thermal deformation are successfully eliminated due to plastic deformation happens during hydro-assisted forming process. In view of hydro-assisted forming process, sound thickness distribution is an effortless advantage for bending deformation has less effection on thickness distribution. The maximum thinning ratio is only 5 % for hydro-assisted forming, which is far less than that of tube hydroforming. At last, an integrally stiffened tubal component with ellipticity of 2 was formed successfully by hydro-assisted forming technology, which rib height reaches 10 mm.

Forming mechanism of double-layered tubes by internal hydraulic expansion

Theoretical Analysis and Numerical Simulation on the Hydraulic Expansion of Double-Layered Tubes

Experimental Study on Double-layered Tube During Hydraulic Expansion

Experimental Investigation on Double-Layered Pipe During Hydro-Expanding

PRINCIPLE AND MECHANICS ANALYSIS FOR BIMETALLIC TUBE FORMED BY HYDRAULIC EXPANSION

Determination of Expanding Pressure of Hydraulically Expanded Tube-to-Tubesheet Joint

Thickness Demarcation Circle of Double-Cone Tube During Hydroforming

Multistage Axial Hydro-Forging Sequence of Double-Stepped Tube with Large Expansion Ratio

Multistage Axial Hydro-Forging Sequence: A New Forming Approach for Manufacturing of Double-Stepped Tubes

New Developments in Theory and Processes of Internal High Pressure Forming

Deformation Analysis of Double-Sided Tube Hydroforming in Square-Section Die

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Further Assessment of the Plastic Instability of Thin-Walled Tubes in Double-Sided Hydro-Bulging Process with Verification Experiments

Modeling Hydraulically Expanded Tube-To-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Effect of Internal Pressure Distribution on Thickness Uniformity of Hydroforming Y-shaped Tube

A Theoretical and Experimental Study on Forming Limit Diagram for A Seamed Tube Hydroforming

Practicality and Formability of Integrally Stiffened Tube Hydro-Assisted Forming

Study on Hydro-Forming Technology of Manufacturing Bimetallic CRA-lined Pipe

Synchronized Hydraulic Bulging Forming Technology of Three-Layer-Metal Tubes

Axial Stress Analysis for the Hydro Bending Process of Double-Layered Tube

Study on Experimental Approaches of Forming Limit Curve for Tube Hydroforming