Abstract:To achieve integrally stiffened tubular component, a new technology named as hydro-assisted forming was put forward, which successfully realized integral component forming. Experiment and finite element simulation were conducted to explore the practicality and formability of stiffened tube hydro-assisted forming. Based on plastic mechanics, the critical mechanics condition was analyzed and given. At last, the shape error and thickness distribution were given in detail. The results indicate that internal pressure induces not only tensile hoop stress but also "backward" bending moment, which are useful to eliminate wrinkle defect. But it is worthwhile to note that buckling defect would happen if the internal pressure was too high due to the effection of rib initial deflection. Shape accuracy is sensitive to internal pressure. Geometric error decreases as internal pressure, but increases after the internal pressure reaches a certain degree. Both welding residual stress and thermal deformation are successfully eliminated due to plastic deformation happens during hydro-assisted forming process. In view of hydro-assisted forming process, sound thickness distribution is an effortless advantage for bending deformation has less effection on thickness distribution. The maximum thinning ratio is only 5 % for hydro-assisted forming, which is far less than that of tube hydroforming. At last, an integrally stiffened tubal component with ellipticity of 2 was formed successfully by hydro-assisted forming technology, which rib height reaches 10 mm.

PRINCIPLE AND MECHANICS ANALYSIS FOR BIMETALLIC TUBE FORMED BY HYDRAULIC EXPANSION

Forming mechanism of double-layered tubes by internal hydraulic expansion

Theoretical Analysis and Numerical Simulation on the Hydraulic Expansion of Double-Layered Tubes

Study on Hydro-Forming Technology of Manufacturing Bimetallic CRA-lined Pipe

Analytical Model for Tube Hydro-Bulging Test, Part I: Models for Stress Components and Bulging Zone Profile

A Theoretical Study of the Expansion Metal Tubes

Synchronized Hydraulic Bulging Forming Technology of Three-Layer-Metal Tubes

The Hydroforming Process with Radial Self-energizing Seal for Manufacturing Bimetal-lined Pipe

Plastically Deformed Tubes Subjected to Mechanical Expansion Processes

Stress and strain state of tube hydroforming and it's influence on destabilization

Determination of Expanding Pressure of Hydraulically Expanded Tube-to-Tubesheet Joint

Theoretical and Experimental Study of Bimetal-Pipe Hydroforming

Experimental Study on Double-layered Tube During Hydraulic Expansion

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

New Developments in Theory and Processes of Internal High Pressure Forming

Further Assessment of the Plastic Instability of Thin-Walled Tubes in Double-Sided Hydro-Bulging Process with Verification Experiments

Analysis and Finite Element Simulation of the Tube Bulge Hydroforming Process

Practicality and Formability of Integrally Stiffened Tube Hydro-Assisted Forming

Modeling Hydraulically Expanded Tube-To-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Thickness Demarcation Circle of Double-Cone Tube During Hydroforming