Abstract:Tin monosulfide can be grown in cubic (pi-SnS) and orthorhombic (alpha-SnS) polymorphs by low-temperature atomic layer deposition (ALD). The optical properties of these polymorphs make them attractive for the realization of plasmonic solar cells with ultrathin absorber layers down to 10 nm in thickness. SnS is also an earth-abundant and nontoxic compound semiconductor of high interest for regular thin-film photovoltaics. To better understand the behavior of the two SnS polymorphs in ultrathin solar cell configurations, we here fabricate, characterize, and analyze a range of such devices. ALD is used to grow SnS and form heterojunctions with zinc oxysulfide [Zn(O,S)], acting as a buffer layer with a composition-tunable bandgap. Apart from the roles of the SnS polymorph and Zn(O,S) composition, the effects of the back contact material and thicknesses of buffer and absorber layers are investigated. Devices using pi-SnS and pure ZnO buffers yield the highest photocurrents (3.1 mA/cm(2)) and higher open circuit voltage (159 mV) than similar alpha-SnS-based devices. Analysis of the equivalent-circuit parameters suggests that interface recombination limits the voltage for these devices. While Zn(O,S) with a higher sulfur content provides chemical passivation of the SnS interface and excessive open circuit voltages above 600 mV, it also exhibits a too high conduction band offset, which hampers current collection. A growth delay during the ALD of Zn(O,S) on SnS initially amplifies the known sulfur-oxygen exchange reaction, such that a sulfur-rich Zn(O,S) region forms next to the SnS interface. This causes a thin ZnS-like barrier to form already for low cycle fractions of the H2S precursor in the ALD super-cycle. Voltage and fill factor trends suggest an optimal SnS absorber layer thickness in the range of 15-35 nm, presenting an opportunity for plasmonic absorption enhancement. Devices with pi-SnS show most promise, but interface recombination versus current-blocking is a dilemma for the SnS/Zn(O,S) heterojunction.

Alsb Thin Films Prepared By Dc Magnetron Sputtering And Annealing

Preparation of AlSb film by screen printing and sintering method

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

Synthesis and characterization of Zn doped AlSb thin films for photovoltaic and energy applications

Antimony sulfide thin films in chemically deposited thin film photovoltaic cells

Theoretical simulation and design of AlSb thin films solar cells

Investigation of CuIn1-xAlxSe2 Thin Film for Solar Cells Prepared by a Selenization Process

Pulsed laser deposition of antimony selenosulfide thin film for efficient solar cells

Preparation and characterization of Sb2Se3 thin films by electrodeposition and annealing treatment

Novel Sandwich Structure for Aluminum Induced Crystallization of Amorphous Silicon Thin Films at Low Temperature

Facile Synthesis and Characterization of PbS thin films doped with various Aluminum Concentrations for Photovoltaic Applications

Nano-crystalline Thin Films Fabricated by Si-Al Co-Sputtering and Metal Induced Crystallization for Photovoltaic Applications

P-silicon Thin Film Fabricated by Magnetron Sputtering and Aluminium Induced Crystallization for Schottky Silicon Solar Cells

Sb2S3 Thin Films Prepared by Vulcanizing Evaporated Metallic Precursors

Microstructural and Optical Properties of Sb2S3 Film Thermally Evaporated from Antimony Pentasulfide and Efficient Planar Solar Cells

Structure, Morphology, and Photoelectric Performances of Te-Sb2Se3 Thin Film Prepared via Magnetron Sputtering

Study of Sb2Se3/Al interface affected by oxygen exposure

Ultrathin Solar Cells Based on Atomic Layer Deposition of Cubic Versus Orthorhombic Tin Monosulfide

Inhibiting Aluminum Oxidation in CuInAl Precursor Films: Significance for Achieving High-Performance Cu(InAl)Se2 Solar Cells