Abstract:The results of experimental investigations using laser speckle interferometry on small size three-point bending notched beams and using photoelastic coating and the strain gauges on very large size compact tension specimens of concrete are presented in detail. The investigations showed that there exists a stage of stable crack propagation before unstable fracture occurs. The results are in agreement with other researchers' investigations using moire interferometry, holographic interferometry, dye-impregnation method and microscope. Further detailed study shows that the three different states, i.e., crack initiation, stable crack propagation and unstable fracture can be distinguished in the fracture process in concrete structures. In order to predict the crack propagation during the fracture process in quasi-brittle materials a double-K criterion is proposed. The double-K criterion consists of two size-independent parameters. Both of them are expressed in terms of the stress intensity factors. One of them reflects the initial cracking toughness, denoted with K ini , which can be directly evaluated by the initial cracking load, P ini , and the precast crack length, a 0 , using a formula of LEFM. The other one refers to the unstable fracture toughness, denoted with K un , which can be obtained inserting the maximum load, P max , and the effective crack length, a, into the same formula of LEFM. The values of the two parameters, K Ic ini and K Ic un , obtained from the small size three-point bending notched beams and the large size compact tension specimens show that K Ic ini and K Ic un are size-independent. Evaluating with the K-resistance curves obtained from the same test data, it is found that the proposed double-K criterion is equivalent to it in basic principle, but, the double-K criterion can be applied more easily than the K-resistance curve. Finally, as a practical example, the application of the double-K criterion to the prediction of the crack propagation in a concrete dam is discussed.

Experimental Investigation on Mode II Fracture Toughness K<sub>IIC</sub> of Concrete and Fracture Behavior

Experimental Investigation On Mode Ii Fracture Toughness K-Iic Of Concrete And Fracture Behavior

Experimental study on fracture toughness K_(Ⅱc) of concrete

Mode II fracture toughness determination of rock and concrete via Modified Direct Shear Test

Experimental Research of Mode Ⅱ Fracture Based on Self-monitoring Behavior of Carbon Fiber Reinforced Concrete

A practical testing approach to determine mode II fracture energy GIIF for concrete

Experimental Determination of KIIC of Normal Strength Concrete

A Fracture toughness criterion for concrete

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Experimental measurement of double-K fracture parameters of concrete with small-size aggregates

Effect of Size and Cohesive Assumptions on the Double-K Fracture Parameters of Concrete

Fracture Toughness of Ordinary Plain Concrete Under Three-Point Bending Based on Double-K and Boundary Effect Fracture Models

Determination of double- K criterion for crack propagation in quasi-brittle fracture, Part II: Analytical evaluating and practical measuring methods for three-point bending notched beams

Experimental Evaluation of Fracture Toughness for Epoxy-Repaired Concrete Considering Crack Deflection Angle

Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part III: Compact tension specimens and wedge splitting specimens

Determination of double-Determination of double- K criterion for crack propagation in quasi-brittle fracture Part I: experimental investigation of crack propagation

Experimental Study on Some Factors Affecting Fracture Property of Concrete

A new test method for the complete load-displacement curve of concrete under mixed mode I-II fracture

Crack Extension Resistance and Fracture Properties of Quasi-Brittle Softening Materials like Concrete Based on the Complete Process of Fracture