Abstract:The dielectric constant of CCTO materials can be as high as 10(4), which makes it suitable for use in electronic devices but the high dielectric loss limits its application. In this paper, a series of Sr and Zr co-doped CCTO ceramics having the formula Ca0.8Sr0.2Cu3Ti4-xZrxO12 (x = 0.1, 0.2, 0.3, 0.4) were obtained via a solid-state reaction technique. We force the effect of the Zr content on the phase composition, microstructure, cationic valence states, impedance, and dielectric properties of the as-prepared ceramics to reduce dielectric loss. The results demonstrate that Sr and Zr co-doping increases dielectric constant and reduces dielectric loss simultaneously, and the maximum dielectric constant (1.87 x 10(5), 1 Hz) and minimum dielectric loss (0.43, 10(2) Hz) are obtained when x = 0.3. Mixed Cu+/Cu2+ and Ti3+/Ti4+ valence states are observed to coexist in the co-doped material lattices, which promote dipole polarization, and thereby increase the dielectric constant of the ceramics. The dielectric properties of the materials are analyzed according to the internal barrier layer capacitance model, which elucidates the contributions of the grains and grain boundaries to dielectric performance. The maximum grain boundary resistance (3.7 x 10(5) omega) is obtained for x = 0.3, which contributes toward the minimum dielectric loss (0.43) obtained for this ceramic at a frequency less than 1 kHz. The average grain sizes of the samples decrease with increasing Zr content, which is the primary factor increasing the grain boundary resistance of the co-doped ceramics.

Preparation and Dielectric Properties of Sr(Ti0.95zr0.05)O-3 Ceramics Doped with Cao-Tio2-Sio2 (Cts)

Dielectric Properties and Low‐Temperature Sintering of the <scp><scp>Ba</scp></scp><sub>0.6</sub><scp><scp>Sr</scp></scp><sub>0.4</sub><scp><scp>TiO</scp></scp><sub>3</sub> Ceramics with <scp><scp>B</scp></scp><sub>2</sub><scp><scp>O</scp></scp><sub>3</sub>/<scp><scp>CuO</scp></scp> Additions

Dielectric Properties And Low-Temperature Sintering Of The Ba0.6sr0.4tio3 Ceramics With B2o3/Cuo Additions

Effects Of Catio(3)On Microstructures And Properties Of (1-X) Znal2o4-Xmg(2) Tio4 (X=0.1) Microwave Dielectric Ceramics

Effect of SrTiO 3 on the Properties of CBS Glasses/al 2 O 3 Ceramics

VSintering and Nonlinear Dielectric Properties of Ba<sub>0.6</sub>Sr<sub>0.4</sub>TiO<sub>3</sub> Ceramics Prepared by Citrate Method

Effect of ZnO Doping on the Microstructure and Microwave Dielectric Properties of 0.2Catio3-0.8(Li0.5sm0.5)tio3 Ceramics

Enhanced Dielectric Properties of Ca0.9Sr0.1Cu3-Zn Ti4-B O12 Ceramics by Modifying Grain Boundary Response

Sintering and Characterization of Ca0.9sr0.1tio3 Ceramics with Sintering Additive

Structure and Enhanced Dielectric Properties of B and Sr Modified CaCu3Ti4O12 Ceramics

CaCu3Ti4O12 Ceramics Prepared by Solid State Reaction Sinter

Influence of Zirconium and Strontium Co-Doping on Microstructure and Dielectric Properties of CaCu3Ti4O12 Synthesized by the Sol-Gel Method

Effects of Sintering Temperature on Microstructure and Dielectric Properties of Sr0.985Ce0.01TiO3 Ceramics

Low Temperature Sintering and Microwave Dielectric Properties of 0.2ca0.8sr0.2tio3–0.8li0.5sm0.5tio3 Ceramics with BaCu (B2O5) Additive and TiO2 Dopant

Sol–gel Synthesis and Characterization of Ba(1−x)SrxTiO3 Ceramics

Structure and Microwave Dielectric Behavior of A‐Site‐Doped Sr(1−1.5x)CexTiO3 Ceramics System

Dielectric properties of Ti 4+ /Zr 4+ modified the SrCeO 3 -based microwave ceramic systems

Microstructures and Microwave Dielectric Properties of Low-Temperature Fired Ca0.8Sr0.2TiO3-Li0.5Sm0.5TiO3 Ceramics with Bi2O3-2B2O3 Addition

EFFECT OF Mg~(2+) AND Sr~(2+) DOPING ON THE MICROSTRUCTURE AND DIELECTRIC PROPERTIES OF CaCu_3Ti_4O_(12) CERAMICS

Sr and Zr Co-Doped CaCu3Ti4O12 Ceramics with Improved Dielectric Properties