Abstract:This study presents a hybrid method of three-dimensional computational fluid dynamics (CFD) commercial software and inverse method along with experimental data and various flow models to study the natural convection heat transfer and fluid flow characteristics of vertical annular elliptical finned tube heat exchangers for various fin spacings. The inverse method of the finite difference method along with the experimental temperature data is first applied to estimate the heat transfer coefficient on the fins. After that, CFD along with various flow models and estimated heat transfer coefficients are used to determine air temperature and air velocity profiles, fin surface temperature and heat transfer coefficient on the fins. More accurate numerical results, appropriate flow model and number of grid points, number of iterations and relative convergence criteria can be obtained when the resulting heat transfer coefficient and fin temperature are as close as possible to the inverse results and experimental temperature measurements, respectively. The results show that the zero-equation turbulence model is more suitable for this study than other flow models. The choice of relative convergence criteria, number of iterations and grid points are important for obtaining more accurate results. The commercial software version, the relative convergence criteria for momentum and energy equations, the number of iterations and the N-t value vary with the fin spacing. The effect of the round-off error on the numerical results obtained needs to be considered. The heat transfer coefficient increases with increasing fin spacing and approaches a constant. The best fin spacing is about 18 mm. The fin efficiency of the annular elliptical fins is higher than that of the annular circular fins. The proposed correlations between Nusselt number and Rayleigh number is in good agreement with the numerical and inverse results obtained. (C) 2018 Elsevier Ltd. All rights reserved.

Numerical Study of Natural Convection in Plate Heat Sinks with Grid Square Holes

Orientation Effects on Natural Convection Heat Dissipation of Rectangular Fin Heat Sinks Mounted on LEDs

Nature Convection Heatsink Modeling and Optimization Based on Nusselt Number Correlation

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Natural Convection Heat Transfer along Vertical Cylinder Heat Sinks with Longitudinal Fins

Numerical auxiliary study of charge-air cooler design

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Study on LED Array Heat Radiator Improvement under Natural Convection

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Numerical and Experimental Study on the Flow and Heat Transfer Performance of a Plate-Fin Heat Exchanger Using for Environmental Protection

Numerical simulation of heat transfer and flow characteristics for plate fin-and-tube heat exchanger with ring-bridge slit fins

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.

Experimental study on natural convection from vertical cylinders with perforated plate fins

Experimental and numerical investigation on the heat transfer enhancement for Mini-channel heat sinks with tessellated fins

Numerical Estimation of Heat Transfer Characteristics for Two-Row Plate-Finned Tube Heat Exchangers with Experimental Data

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Numerical investigation on fin configuration improvement of 2 K sub-atmospheric plate-fin heat exchangers for the superfluid helium cryogenic systems