Abstract:Concrete cracks due to shrinkage, changes of temperature and humidity and other reasons may impair the structural integrity and durability of concrete structures. To relieve the tensile strains and prevent unexpected cracks, one strategy is to intentionally set joints (namely control joints) at appropriate locations within the concrete members. In this paper, the validity and the major influencing factors of the control joints were studied. Firstly, in total eighteen slabs, including sixteen with control joints and the other two without control joints, were constructed and tested. Different concrete mix proportions, joint locations and depths, as well as the reinforcement ratios were considered. The concrete slabs were tested for 9 months with the complete process of the initiation and development of the concrete cracks in the slabs recorded. Secondly, for the purpose of numerical analysis, material properties of concrete were tested, using which numerical simulation and parametric study were conducted. It was found that the initiation and development of cracks in concrete slabs may be simulated by means of numerical modeling techniques. Cracks in concrete slabs can be to a large extent effectively regulated and the random occurrence of cracks can be prevented. Finally, the generated knowledge and the modeling technology were applied into a real project with tight restrictions on concrete cracks. By properly setting control joints according to the numerical simulation results the cracks were well controlled. © 2010 ASCE.

The Temperature Stress of Large Area Cast-in-Site Concrete Hollow Slabs

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Solution to Alleviate the Temperature Stress in Large Volume Concrete with Breathing Method

RESEARCH ON TEMPERATURE STRESS IN LARGE AREA CONCRETE BEAM- SLAB STRUCTURE

Study on Temperature Cracks in the Concrete Hollow Pint-sized Block Buildings

RESEARCH ON TEMPERATURE STRESS OF CONCRETE FRAME STRUCTURES WITH LARGE LONGITUDINAL LENGTH

Research on Site Tracing Monitoring of Temperature Field of Concrete Small Hollow Block Building

Research on Crack-Resisting Construction Design Method of Concrete Small Cavity Block Building Based on Temperature Effect

Stress analysis of concrete slab in high CFRD and measures for improving the stress state

Control Joints in Cast In Situ Concrete Slabs and Its Application

Analysis on Temperature Stress of the Shanghai South Railway Station

Temperature Stress Analysis of an Overlength Basement Concrete Structure

Numerical Simulation of Temperature Gradients for the Mass Concrete Foundation Slab of Shanghai Tower

FEM Analysis and Design on Temperature Effect of Super-long Concrete Floor

Reduction of Temperature Stress of Concrete Frame with Large Longitudinal Length Using Sliding Support

The practice on thermal stress and crack control in mass concrete base plate of large water conveyance pump station

On temperature control measures of large volume concrete slab

THERMAL STRESS CALCULATION OF SUPER-LONG CONCRETE STRUCTURE CONSIDERING ACTUAL CONSTRUCTION CONDITION

Analysis on the temperature stress of super long structure of roof concrete slab of one underground car park

Influence of Different Construction Measures on Temperature Stress in Over-long Concrete Frame Workshop

The thermal stress and crack resistance check on the large-volume concrete