Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The bionic nozzle was designed based on earthworms' non-smooth surface structure and the properties of auxiliary jet holes. The drag reduction mechanism and hydraulic characteristics of convex structure-auxiliary jet hole inner wall nozzle (SG), convex structure inner wall nozzle (VS), concave structure inner wall nozzle (CS), and smooth inner wall nozzle (S) were simulated and analyzed using computational fluid dynamics (CFD). The simulation results show that the maximum instantaneous velocities of the four nozzles are SG (29.2 m/s) > VS (28.79 m/s) > CS (28.55 m/s) > S (28.35 m/s). The biomimetic nozzle's convex structure generates a reverse velocity field, and this causes the low-speed fluid to cluster along the vertical direction of the jet, generating a low-speed turbulent band and enabling the low-speed field to constantly rise toward the jet's center area, thus reducing fluid resistance. The auxiliary jet holes can further reduce the intensity of turbulent processes and achieve the goal of reducing drag. Therefore, the SG-shape has the most significant drag reduction effect. Based on the coupling of CFD and finite element analysis (FEA), the relationship between input parameters (auxiliary jet hole diameter P1, convex structure diameter P2, and auxiliary jet hole length P3) and output response (maximum principal elastic strain and maximum principal stress) was determined. Response surface methodology was used to optimize P1, P2, and P3 parameters of SG-shape, resulting in the optimal combination of P1 = 1.45 mm, P2 = 2.71 mm, and P3 = 9.27 mm. Through CFD simulation and water jet impact test verification, the maximum velocity of the optimized biomimetic nozzle is 31.2 m/s, which is 6.8% higher than before optimization. The maximum impact force generated by the optimized water jet is 8.61 KG, a significant increase of 7.5% compared to before optimization.

The Design of Threading Water-jet Nozzle

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Design of Nozzle in Water Jet for Cutting Waste Steel and Its Experiments

Design of nozzle in Water Jet for Cutting Steel Srap and Its Experiments

Design of Control Process for Water-assisted Injection Molding System

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

Finite element analysis of nozzle selection based on high pressure water jet technology

Research on the structures and hydraulic performances of the typical direct jet nozzles for water jet technology

Waterjet Penetration Simulation by Hybrid Code of SPH and FEA

Simulation and Optimization of the Nozzle Section Geometry for a Suspension Abrasive Water Jet

Design of water nozzle shape and structure optimization for eccentric injection mandrel in water injection wells

A Nozzle Structure of Wire Drawing Prevention for 3D Printing Fused Deposition Manufacturing

Numerical Simulation of the Internal Flow Field of a New Main Nozzle in an Air-Jet Loom Based on Fluent

Software design of numerical control system based on thread technique

Advanced Waterjet Technology for Machining Beveled Structures of High-Strength and Thick Material

Simulation and Research on Water Jet Formation of a New Type Molding Cutter

Theoretical Analysis of Automatic Wire Connection by High Pressure Air for Horizontal Millers

Optimization of Abrasive Water Jet Nozzle Based on Numerical Simulation

Numerical Analysis of Swirling-Abrasive Water Jet Flow in the Nozzle

Numerical analysis of hydraulic properties of bionic nozzles and structural optimization based on CFD–FEA

A Software Design Based on the Projective Water-jet Cutting NC Machine