Abstract:In this study, layered Li–Ni–Co–Mn oxide (LiNi1-x-yCoxMnyO2) cathode materials with different transition metal compositions (LiNi1/3Co1/3Mn1/3O2, LiNi0.5Co0.2Mn0.3O2, and LiNi0.8Co0.1Mn0.1O2) are synthesized by a simple mixing process and solid-state reaction at a high temperature. The samples show a typical hexagonal α–NaFeO2 structure with a single phase and predominantly spherical morphology with a homogeneous particle size distribution. The electrochemical properties of the samples are investigated in different voltage ranges by galvanostatic charge/discharge tests. The results reveal that the capacity increases with increasing the charging cutoff voltage by 0.1 V for all the samples. In addition, the LiNi1/3Co1/3Mn1/3O2, LiNi0.5Co0.2Mn0.3O2 and LiNi0.8Co0.1Mn0.1O2 samples deliver initial discharge capacities of 161.0, 170.8, and 202.3 mAh g−1, respectively, at a 0.1 C rate with the voltage ranging from 3.0 to 4.3 V, which increase by 23.4%, 18.8%, and 8.2%, respectively, with the increase in the charging cutoff voltage from 4.3 to 4.6 V. Furthermore, compared with LiCoO2, the samples exhibit a relatively superior cycling performance with an increase of the charging cutoff voltage. Cyclic voltammetry tests reveal that the redox process at approximately 4.5–4.6 V corresponds to Co3+/Co4+, and that at approximately 3.6–3.8 V corresponds to Ni2+/Ni4+. X-ray diffraction measurements confirm the reversible phase transition and excellent structural stability of the LiNi1-x-yCoxMnyO2 materials against prolonged cycling.

Study on the first reversible behavior of the layered Li(Ni1-xCox)O2

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Study on the Structure and Electrochemical Characterization of the Non-stoichiometric Li1+xNi0.8Co0.2O2 Materials

Unravelling the Origin of Irreversible Capacity Loss in NaNiO2 for High Voltage Sodium Ion Batteries

Characterization and Control of Irreversible Reaction in Li-Rich Cathode during the Initial Charge Process

Revisiting the Initial Irreversible Capacity Loss of LiNi0.6Co0.2 Mn0.2O2 Cathode Material Batteries

The Study of the First Lithium Intercalation /deintercalation Ion in Bedded Li (Ni1-Xcox) O2 Structure

Synergetic effect of high Ni ratio and low oxygen defect interface zone of single crystals on the capacity retention of lithium rich layered oxides

Elucidating the Role of Excess Li in the Electrochemical Performance of Li1+x[Ni0.5Mn0.5](1-x)O-2 Layered Oxides

The Effects of Reversibility of H2-H3 Phase Transition on Ni-Rich Layered Oxide Cathode for High-Energy Lithium-Ion Batteries

Insights into the Structural Evolution and Li/O Loss in High-Ni Layered Oxide Cathodes

Synthesis and charge-discharge characteristics of polycrystalline LiNi 1-xCoxO2 (0 ≤ x ≤ 0.5) as a cathode material for lithium rechargeable batteries

Non-monotonic first-cycle irreversible capacity governed by delithiation depth in Li-rich layered cathodes

Elucidating the Role of Excess Li in the Electrochemical Performance of Li<sub>1+x</sub>[Ni<sub>0.5</sub>Mn<sub>0.5</sub>]<sub>1−x</sub>O<sub>2</sub> Layered Oxides

Effect of Mn Doping on the Structure and Electrochemical Performance of LiNi0.7Co0.3O2

On the microscopic origin of reversible and irreversible reactions of LiNixCoyMnx cathode materials: Ni-O hybrid bond formation vs. cationic and anionic redox

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Ion Exchange Method to Synthesis LiMn1-xCoxO2 and Characterization as Cathode Materials for Lithium-Ion Batteries

Identifying the chemical and structural irreversibility in LiNi0.8Co0.15Al0.05O2 – a model compound for classical layered intercalation

Electrochemical performance and structural stability of layered Li–Ni–Co–Mn oxide cathode materials in different voltage ranges

Minimization of the cation mixing in Li1+x(NMC)1-xO2 as cathode material