Abstract:Cathode materials Li[Ni x Li(1/3−2x/3)Mn(2/3−x/3)]O2 with different content of Ni (x = 1/4, 1/3) were synthesized using co-precipitation reaction. Power X-ray diffraction measurement confirmed that the obtained Li[Ni x Li(1/3−2x/3)Mn(2/3−x/3)]O2 (x = 1/4, 1/3) possessed a layered structure and \( R\overline{3} m \) space group. Scanning electron microscopy results showed that all Li[Ni x Li(1/3−2x/3)Mn(2/3−x/3)]O2 were characterized by a large amount of micro-nanoparticles with tuck form. Based on our previous studies of conventional layered materials, powerful electrochemical evidences of charge/discharge mechanisms and electrode/electrolyte interfaces properties were given by differential capacitance curves and electrochemical impedance spectroscopy (EIS). It was found that the first charge differential capacitance curves of the Li-rich materials displayed three major reactions: the oxidation of Ni2+/4+, the extraction of oxygen and the exchange of proton, and the capacity contribution are 65.2, 25.6, and 9.2 % respectively. Nevertheless, the oxidation of Ni2+/4+ was the only reaction in the following charge processes. The EIS results showed that Li-rich material could form a stable SEI film in the charge/discharge process even though the breakdown or dissolution of the resistive SEI film appearing in the high voltage; the electronic properties changed with oxidation reactions and phase transition; and the continuous increase of the charge transfer resistance, which might be the major reason of the poor high-rate performance of Li-rich materials.

Minimization of the cation mixing in Li1+x(NMC)1-xO2 as cathode material

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Synthesis and Electrochemical Characteristics of Li₁.₂(Ni₀.₂Mn₀.₆)ₓ(Co₀.₄Mn₀.₄)y(Ni₀.₄Mn₀.₄)₁₋ₓ₋yO₂ (0 ≤ X + Y ≤ 1) Cathode Materials for Lithium Ion Batteries

Cobalt-free nickel rich layered oxide cathodes for lithium-ion batteries.

Bio-inspired synthesis of xLi2MnO3-(1 − x)LiNi0.33Co0.33Mn0.33O2 lithium-rich layered cathode materials

Preparation of layered LiNi1/3Co1/3-xLaxMn1/3O2 as cathode material by oxalate co-precipitation method

Electrochemical Performance of Layer-Structured Ni0.8Co0.1Mn0.1O2 Cathode Active Materials Synthesized by Carbonate Co-Precipitation

Synthesis and Electrochemical Properties of Li-rich Cathode Material Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 (x = 1/4, 1/3) for Li-ion Battery

Synthesis, Characterization and Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2cathode Materials for Lithium-Ion Batteries

Improvement of LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> Cathode Materials by Nano-MgO Doping

Synthesis and Electrochemical Properties of Li[Ni X Co Y Mn 1− X − Y ]O 2 ( X, Y = 2/8, 3/8) Cathode Materials for Lithium Ion Batteries

Synthesis and Characterization of LiNi1/3Mn1/3Co1/3O2 by Wet-Chemical Method

High capacity 0.5Li2MnO3·0.5LiNi 0.33Co0.33Mn0.33O2 cathode material via a fast co-precipitation method

Influences of Transition Metal on Structural and Electrochemical Properties of Li[NixCoyMnz]O2 (0.6≤x≤0.8) Cathode Materials for Lithium-Ion Batteries

Substantial Doping Engineering in Layered LiNi0.5+xCo0.2−xMn0.3O2 Materials for Lithium-Ion Batteries

Synthesis and performance study of Li_(1.1)Ni_(0.35)Mn_(0.55)O_2 cathode material of lithium-ion batteries

Oxalate Co-Precipitation Synthesis of LiNi0.6Co0.2Mn0.2O2 for Low-Cost and High-Energy Lithium-Ion Batteries

Synthesis and Characterization of LiNi0.6Mn0.4−xCoxO2 As Cathode Materials for Li-ion Batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

Preparation of Layered LiNi_(1/3)Co_(1/3-x)La_xMn_(1/3)O_2 As Cathode Material by Oxalate Co-Precipitation Method