Abstract:We study the auto-ignition behavior of several natural gas surrogates; in particular, the influence of ethane and propane on the ignition delay time of methane is studied. A rapid compression machine was used to obtain experimental measurements of ignition delay times at two different compression pressures (10 and 15 bar) and a wide range of compression temperatures (904–1151 K), for both stoichiometric and fuel-rich (<math>ϕ=2</math>) mixtures. The experimental results are compared to homogeneous reactor model simulations (HOMREA). A first set of simulations treats chemical reaction in detail, using the AramcoMech 3.0 reaction mechanism. It was observed that the mechanism predicted the observed ignition delay times well. Experimental results indicate that both ethane and propane have an ignition enhancing effect on the mixture, shortening the ignition delay time. Propane, in particular, appears to have a higher influence compared to ethane at low temperatures. In general, fuel rich mixtures show shorter ignition delay times. These trends are well captured by the AramcoMech 3.0 mechanism showing great agreement with experimental data.To make the chemistry underlying the AramcoMech 3.0 available in a concise form, e.g., for CFD applications or similar, a reduced chemistry scheme was developed (reaction mechanism with 49 species and 332 reactions). Simulations using the reduced model showed a similarly good agreement to which was developed based on the detailed AramcoMech 3.0 reaction mechanism. The experimental results are predicted well by the reduced model, in a similar fashion like the detailed scheme. Furthermore, the reduced reaction mechanism is validated against experimental data found in literature, covering a wide range of conditions. This establishes the reduced model as a useful, computationally efficient substitute for describing the effect of ethane and propane onto the auto-ignition of methane.

Reduced Kinetic Mechanisms for the Simulation of Detonation in H2-N2O-Ar Mixtures

Reduction Methodology for Detailed Kinetic Mechanisms : Application to n-Hexane-Air Hot Surface Ignition

Reduced kinetics of NH 3 /n-heptane: Model analysis and a new small mechanism for engine applications

Impact of Intermediate Species in Simulating Oblique Detonation with Pre-Vaporized N-Decane/air Mixtures Substituting for Kerosene/Air Mixtures

Mechanism Reduction for Hetero /Homogeneous Combustion of Syngas over Platinum

Reduced reaction mechanism for natural gas combustion in novel power cycles

Coupled Reaction Mechanism Reduction for the Hetero-/Homogeneous Combustion of Syngas over Platinum

On the Development of Detailed and Reduced Reaction Mechanisms for Combustion Modeling

An augmented reduced mechanism for methane oxidation with comprehensive global parametric validation

Numerical Study of the Detonation Structure in Rich H 2 −NO 2 /N 2 O 4 and Very Lean H 2 −N 2 O Mixtures

Development of a reduced chemical mechanism for ammonia/ n -heptane blends

Exploring the Chemical Kinetic Effects on the Direct Detonation Initiation in H 2 -O 2 -Ar Mixtures

Development and Reduction of n-Tetradecane Mechanism for Low Temperature Ignition and Combustion

Reduced chemistry for a gasoline surrogate valid at engine-relevant conditions

Assessment of H2-CH4-air Mixtures Oxidation Kinetic Models Used in Combustion

Community Reaction Network Reduction for Constructing a Coarse-Grained Representation of Combustion Reaction Mechanisms

Exploring the chemical kinetic effects on the direct detonation initiation in H2-O2-Ar mixtures

Reduced Kinetic Model for Complex Turbulent n-Heptane Flame Simulations

Compact Combustion Mechanisms of Typical n-Alkanes Developed by the Minimized Reaction Network Method

Reduced Kinetic Mechanism for Modeling High-Temperature Ignition and Flames for n-Pentanol

Construction and Analysis of A Chemical Kinetic Model for Monomethylhydrazine/Nitrogen Tetroxide Reactions