Abstract:The effects of low-temperature chemistry (LTC) on n-heptane/air premixed turbulent flames in the thin reaction zones regime are investigated using direct numerical simulations (DNS) with reduced multistep chemistry (129-species, 1234-reaction mechanism reduced from CaltechMech). An initial mixture of n-heptane/air at an equivalence ratio of 0.7, unburnt temperature of 650 K, and atmospheric pressure, which is in the negative temperature coefficient (NTC) region, is considered. The focus is put on three separate aspects: 1) LTC in turbulent hot flames propagating in this unburnt (fresh) mixture, 2) turbulent hot flames (with LTC) propagating in a mixture that has undergone first-stage ignition, and 3) turbulent cool flames. These types of flames can all be encountered in modern gasoline compression ignition and diesel engines for example. For the first aspect, it is found that LTC has negligible effect for the conditions considered. For the second aspect, at constant Karlovitz number, the increase in turbulent flame speed (relative to that of turbulent hot flames propagating in the unburnt mixture) due to partial ignition of the reactants is attributed to the increase in laminar flame speed, as opposed to turbulence-LTC interaction. Furthermore, the reaction zone is affected by turbulence in the same way as hot flames propagating in an unburnt mixture. For the third aspect, the first DNS of turbulent cool premixed n-heptane/air flames are presented. Under the current conditions, the initial laminar cool flames are strongly affected by auto ignition, which is expected to occur under engine conditions, and has an ignition front structure. As the turbulent flames develop, turbulent diffusion becomes sufficiently large to initiate self-propagation of the cool flames. The flames are observed to propagate upstream steadily until they reach the inlet. The steady-state turbulent flames are found to have a highly distributed reaction zone. Nevertheless, their reaction zone structure is found to approach that of the reference (self-propagating) laminar flame (which is significantly different than that of the initial ignition fronts). In addition, this strong turbulence does not affect the global chemical pathways compared to those in the reference laminar flame. Finally, their normalized turbulent flame speed is comparable to that of hot flames at similar Karlovitz numbers. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Development and Reduction of n-Tetradecane Mechanism for Low Temperature Ignition and Combustion

A compact skeletal mechanism for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations

Low-temperature Chemistry in N-Heptane/air Premixed Turbulent Flames

Skeletal Reduction of Combustion Mechanism of Kerosene Surrogate Fuels

Compact Combustion Mechanisms of Typical n-Alkanes Developed by the Minimized Reaction Network Method

Development of a Skeletal Chemical Kinetic Mechanism for TRF/NH3 Combustion

Development of Non-stiff Reduced Mechanisms for Direct Numerical Simulations

Development of a reduced n-heptane/toluene/tetrahydrofuran mechanism for dual-fuel engine combustion prediction

Reduced Kinetic Mechanism for Modeling High-Temperature Ignition and Flames for n-Pentanol

Development of a Highly Compact and Robust Chemical Reaction Mechanism for the Oxidation of Tetrahydrofurans under Engine Relevant Conditions

Skeletal and Reduced Mechanisms of N-Decane Simplified with Eigenvalue Analysis

Developing a New Skeletal Mechanism for Propane, Butane, and LPG Fuels

Reduction Methodology for Detailed Kinetic Mechanisms : Application to n-Hexane-Air Hot Surface Ignition

Development of efficient and accurate skeletal mechanisms for hydrocarbon fuels and kerosene surrogate

On the Development of Detailed and Reduced Reaction Mechanisms for Combustion Modeling

Chemical kinetic simulation of kerosene combustion in an individual flame tube

A dynamic adaptive chemistry scheme with error control for combustion modeling with a large detailed mechanism

Construction of reduced chemical mechanisms orientated toward specific applications: a case study of primary reference fuel

Development Of A Reduced N-Decane/Alpha-Methylnaphthalene/Polycyclic Aromatic Hydrocarbon Mechanism And Its Application For Combustion And Soot Prediction

Strategies for mechanism reduction for large hydrocarbons: n-heptane

Application of static integrated skeletal reduction and tabulation of dynamic adaptive chemistry in the combustion simulation of ethylene-fueled scramjet combustor