Abstract:Bridge structures across active faults suffer the serious threats from large surface deformation and velocity pulses. This study focuses on developing a multi-criteria optimizing method and investigating the damping effect of the optimized damper system on a cable-stayed bridge across a strike-slip fault. A simplified baseline corrected method is adopted to recover the static offsets in near-fault records and the improved record-decomposition incorporation method is modified to produce artificial across-fault ground motions. A single pylon cable-stayed bridge across a strike-slip fault is taken as the case bridge and the refined nonlinear numerical model is established in OpenSees. The conventional multi-criteria decision making (MCDM) theory is improved by introducing new function forms and a control parameter to assess the best fault-crossing angles of the case bridge. The improved MCDM method is integrated with the beetle antennae search algorithm to optimize the damper system of the case bridge. Finally, the influence of fault-crossing angles and earthquake parameters (permanent displacements and ratios of maximum to permanent displacement) on the damping effect of the optimized damper system are investigated. The results indicate that the cable-stayed bridge reaches optimal seismic performance when the fault-crossing angle is around 90° (75°-105°) as both the biaxial nonlinearity of the pylon and the risk of the girder unseating are reduced. The damper system is efficiently optimized by the proposed method, and the displacement and force demand of the case bridge are balanced. Both the fault-crossing angles and earthquake parameters are observed to have considerable influence on the damping effects. More specifically, the damping effect on most seismic responses is optimized when the fault-crossing angle approaches 90° (60°-120°). As the permanent displacement increases, the damping effect on the pier-girder relative displacement is significantly reduced and the damping effect on the pier moments is moderately decreased. Moreover, the damping effect is improved for all the seismic responses as the ratios of maximum to permanent displacements increase, with the exception of transverse displacement.

Damper Placement for Seismic Control of Super-Long-Span Suspension Bridges Based on the First-Order Optimization Method

Probabilistic Seismic Evaluation and Experimental Tests of Multi-Direction Damping System on a Super-Long Column-Pylon Cable-Stayed Bridge

Study on seismic response control of a single-tower self-anchored suspension bridge with elastic-plastic steel damper

Seismic Response Mitigation of a Long-Span Tower Bridge with Two Types of Constraint System

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Utilizing yielding steel dampers to mitigate transverse seismic irregularity of a multispan continuous bridge with unequal height piers

Seismic damage control of nonlinear continuous reinforced concrete bridges under extreme earthquakes using MR dampers

Optimisation of Longitudinal Seismic Energy Dissipation System for Straddle-type Monorail-Cum-Road Long-Span Cable-Stayed Bridge

Parametric Study on Fluid Viscous Damper for A Long Span 3-Pylon Cable-Stayed Bridge Based on Seismic Response Control

Performance-based seismic design and optimization of damper devices for cable-stayed bridge

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

Design method of energy-dissipating earthquake-reduction along longitudinal direction of self-anchored suspension bridge

Study on design method of energy-dissipating earthquake-reduction along transverse of self-anchored suspension bridge by using lead dampers

A simplified design method for metallic dampers used in the transverse direction of cable-stayed bridges

Seismic Reduction Analysis of Super-Long Span Suspension Bridge with Lattice Composite Tower and Damping System: A Case of Study for Qiongzhou Strait Bridge

Numerical investigation of transverse steel damper (TSD) seismic system for suspension bridges considering pounding between girder and towers

A SMA-based sliding friction damper for enhancing the transverse seismic performance of isolated bridges

Feasibility simulation of aseismic structure design for long-span bridges

Seismic Performance Of A Multi-Span Rc Highway Bridge With High Damping Rubber Bearings

Seismic Response Control of A Cable-Stayed Bridge Using Negative Stiffness Dampers

Study on the multi-criteria seismic mitigation optimization of a single pylon cable-stayed bridge across strike-slip fault rupture zones