Abstract:In view of the insufficiency of bidirectional seismic control of long-span cable-stayed bridges as well as the limitations of existing schemes, a multi-direction damping system (MDDS) was proposed and investigated in this manuscript, which can provide seismic resistance bidirectionally. The new damping system owned a unique middle connecting structure, which overcomes the disadvantages that axial instability caused of excessive long rod and the demand of large installing space of traditional dampers. Both the performance stability and constitutive relationship of MDDS were verified by engineering tests, and the equivalent design method was then proposed and proved to be applicable. A detailed finite element numerical model of a super-long (main span over 800 m) column-type pylon cable-stayed bridge which equipped with MDDS in practice was established, the fragility curves of critical components were obtained by non-linear time history analysis, which exhibited the high efficiency of MDDS seismic performance in both transversal and longitudinal directions. Through extracting the median fragility value of 35 sections of the pylon under four damping cases, i.e. setting dampers transversely (TDS), longitudinally (LDS), bidirectionally (BDS), and MDDS, it can be concluded that MDDS performed far better on seismic resistance than LDS and TDS, and made the similar contribution with BDS. On account of half number of damper setting and the reduction in installing space demand, MDDS becomes the optimal choice in practical application for its economic efficiency and superiority. Furthermore, the optimal horizontal installing angle of MDDS was derived through six angle cases which was based on the system-level fragility curves comparison.

Seismic Response Control of A Cable-Stayed Bridge Using Negative Stiffness Dampers

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Damping characteristics of PC partial cable-stayed bridge

Estimation of damping matrices of cable-stayed bridges based on known data of modal damping

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

SEISMIC RESPONSE ANALYSIS OF CABLE-STAYED BRIDGES USING CARBON FIBER COMPOSITE CABLE

SEISMIC RESPONSE CONTROL OF A CABLE-STAYED BRIDGE BY VARIABLE DAMPERS

Performance-based seismic design and optimization of damper devices for cable-stayed bridge

Seismic Response Analysis and Shock Absorption Control of Self-anchored Cable-stayed Suspension Bridge

Shake Table Test on a Long-Span Cable-Stayed Bridge with Viscous Dampers Considering Wave Passage Effects

Probabilistic Seismic Evaluation and Experimental Tests of Multi-Direction Damping System on a Super-Long Column-Pylon Cable-Stayed Bridge

A simplified design method for metallic dampers used in the transverse direction of cable-stayed bridges

Parametric Study on Fluid Viscous Damper for A Long Span 3-Pylon Cable-Stayed Bridge Based on Seismic Response Control

SIMULATION ANALYSIS FOR VIBRATION MITIGATION OF STAY-CABLE BY MR DAMPERS UNDER SEMI-ACTIVE CONTROL STRATEGY

Investigation of the Wind-Resistant Performance of Seismic Viscous Dampers on a Cable-Stayed Bridge

Full-bridge Aero-elastic Model Wind-tunnel Tests for Long-span Cable Stayed Bridge with Viscous Dampers

Optimized earthquake reduction design of cable-stayed bridges

Semi-active control of a cable-stayed bridge under multiple-support excitations

Design Method of Energy-Dissipated Earthquake-Reduction along Transverse of Long-Span Cable-Stayed Bridges

Maximum modal damping of cable space vibration control with viscous damper in cable-stayed bridge