Abstract:The article presents the results of studies of the process of obtaining granular materials from high-strength aluminum alloys of the Al - Zn - Mg - Cu system by centrifugation of the melt with ultra-high cooling rates of granules. The concept of a «steam jacket» is introduced, namely, a steam layer that occurs between the granule body and the cooling liquid, which prevents the intensity of heat removal and is an obstacle to increasing the crystallization rate due to the lower thermal conductivity of water vapor. It is established that the formation of a vapor layer always occurs due to the heating of the cooling liquid in contact with the melt drop to boiling temperatures and the transition of the cooler from the liquid phase to steam. The technology of increasing the rate of crystallization of granules due to the constant removal of the vapor layer is proposed. The removal (knocking down) of the vapor shell that occurs around the drop occurs due to the high speed of the drop movement in the cooling medium. Fundamentally important in the industrial implementation of this technology is not so much the design of the device for obtaining pellets by centrifugation of the melt, namely, the high required rotation speed of the spraying crucible of the device under consideration. The results of experimental data are presented to determine the necessary rotation speed of the perforated cup, which ensures the creation of a sufficient initial velocity of the drop movement, leading to a constant churning of the «steam jacket». It is determined that an increase in the rates of heat removal from the crystallized granules and, as a result, an increase in the crystallization rate leads to an increase in the strength characteristics of granular aluminum alloys of the Al-Zn-Mg-Cu system. In particular, in the production of pressed semi-finished products from alloys of the Al-Zn-Mg-Cu system, such as B95, B96c. the increase in the strength characteristics of the material of the press products is up to 15 % compared to the same granular materials obtained by traditional methods with industrial crystallization rates of melt droplets. It is established that this method, based on the removal of the vapor layer around the formed granule, is the only possible one for further increasing the cooling rate and, as a result, the crystallization rate. Reducing the size of granules to the size of powders leads to serious technological problems in the further consolidation of granules and, in fact, is a dead end branch of the further development of granulation methods.

A Novel Granulation Technology for Producing Spherical Wax Particles

Water Removal from Wax Particle Surface by Gas Shear Flow

Uniform discotic wax particles via electrospray emulsification

A granulation process for producing spherical particles of a rubber antioxidant in a water cooling tower

Characteristics of Melted Sulphur Granulation Process in a Water Cooling Tower for Spherical Particles

Cooling and Solidification of Melted Drops in an Immiscible Cooling Medium

Spherical Crystallization Based on Liquid-Liquid Phase Separation In A Reverse Antisolvent Crystallization Process

Synthesis and Performance Evaluation of a Novel Nanoparticle Coupling Expanded Granule Plugging Agent

Energy saving from furnace slag: Study on centrifugal granulation characteristics of the rotating cup

Development of tapered rotating fluidized bed granulator for increasing yield of granules

A Novel Granulation Technique Using a Freeze–thaw Method

Experimental Analysis of Wax Micro-Droplet 3D Printing Based on a High-Voltage Electric Field-Driven Jet Deposition Technology

A Novel Ultrasonic Atomization Process For Producing Spherical Metal Powder

Novel dry-suspension granulation process for preparing pressed powders of ceramic tiles

Morphology and structure characterization of hollow granule mold powder for continuous casting

Elucidation of granulation mechanisms along the length of the barrel in continuous twin-screw melt granulation

Preparation of ZrO2 microspheres by spray granulation

Water Droplets Tailored as Wax Crystal Carriers to Mitigate Wax Deposition of Emulsion

Nano Polymer Microsphere in Paraffin Surface Modification

Investigation of the features of crystallization of granules of high-strength aluminum alloys of the Al-Zn-Mg-Cu system at ultra-high cooling rates

Preparation of spherical zirconia powder by nano-reactor of microemulsion and its densification behavior