Abstract:Advances in micro-electro-mechanical systems (MEMS) have led to an increased fabrication of micro-channels. Microfabrication techniques are utilized to develop microfluidic channels for continuous nutrition supply to cells inside a micro-environment. The ability of cells to build tissues and maintain tissue-specific functions depends on the interaction between cells and the extracellular matrix (ECM). SU-8 is a popular photosensitive epoxy-based polymer in MEMS. The patterning of bare SU-8 alone does not provide the appropriate ECM necessary to develop microsystems for biological applications. Manipulating the chemical composition of SU-8 will enhance the biological compatibility, giving the fabricated constructs the appropriate ECM needed to promote a functional tissue array. This article investigates three frequently used surface treatment techniques: (1) plasma treatment, (2) chemical reaction, and (3) deposition treatment to determine which surface treatment is the most beneficial for enhancing the biological properties of SU-8. The investigations presented in this article demonstrated that the plasma, gelatin, and sulfuric acid treatments have a potential to enhance SU-8's surface for biological application. Of course each treatment has their advantages and disadvantages (application dependent). Cell proliferation was studied with the use of the dye Almar Blue, and a micro-plate reader. After 14 days, cell proliferation to plasma treated surfaces was statistically significantly enhanced (p < 0.00001), compared to untreated surfaces. The plasma treated surface is suggested to be the better of the three treatments for biological enhancement followed by gelatin and sulfuric acid treatments, respectively.

Novel microfabrication approach of embedded SU8™ fluidic networks for cell transport on chips

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

A novel fabrication method of embedded micro-channels by using SU-8 thick-film photoresists

Fabrication of micro/nano fluidic channels by nanoimprint lithography and bonding using SU-8

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Maskless fabrication of cell-laden microfluidic chips with localized surface functionalization for the co-culture of cancer cells.

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Fabricating Technologies of Nanofluidic Chips and Their Applications

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Integrated fabrication of micro/nano-fluidic chip based on nano-imprint lithography and bonding

A new low-cost fabrication method of SU-8 micro–nano channels and needle tip in electro-hydrodynamic jet chips

Fabrication of Micro/nano Fluidic System Combining Hybrid Mask-Mould Lithography with Thermal Bonding

Fabrication of Size Controllable SU-8 Nanochannels Using Nanoimprint Lithography and Low-Pressure Thermal Bonding Methods

Fabrication of Enclosed Nanofluidic Channels by UV Cured Imprinting and Optimized Thermal Bonding of SU-8 Photoresist

High Efficiency Integration of Three-Dimensional Functional Microdevices Inside a Microfluidic Chip by Using Femtosecond Laser Multifoci Parallel Microfabrication.

Surface modification of SU-8 for enhanced cell attachment and proliferation within microfluidic chips

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Fabrication of CE Microchip Based on SU8 and PMMA

Channel resolution enhancement through scalability of nano/micro-scale thickness and width of SU-8 polymer based optical channels using UV lithography

Fabrication of polydimethylsiloxane nanofluidic chips under AFM tip-based nanomilling process