Abstract:White-light OLED devices play an important application in information display fields. Optical interference of the microcavity structure has an important effect on device performances. According to the design of the band structure, ITO/MoO3 composite films were used as the anode, and Mg : Ag (1%) composite films were prepared by coevaporation as the translucent cathode; CuPc was used as the hole injection layer and anode passivation layer, NPB as the hole transmission layer and yellow light main material, rubrene as yellow dopant material, ADN as blue light main material, DSA-Ph as blue dopant material, and TPBi and Alq3 as the electron transport layers. We realized the change of the microcavity structure by adjusting the thickness of each organic functional layer film and simulated and calculated the optimized thickness of each organic film layer and influence on OLED device performances using the SimOLED software system. The optimized OLED microdisplay structure is Si(CMOS)/ITO (35 nm)/MoO3 (2 nm)/CuPc (5 nm)/2-TNATA (20 nm)/NPB (10 nm)/NPB : rubrene (1.5%)ADN : DSA-Ph (5%) (25 nm)/TPBi (15 nm)/Alq3 (1.2 nm)/Mg (13 nm) : Ag (1%). The optimized OLED microdisplay was prepared by the vacuum coating system, and the photoelectric performances of the OLED device were characterized by a spectral testing system consisting of the Photo Research PR655 spectrometer and Keithley 2400 program-controlled power supply. The effect of the microcavity structure on OLED device performances was studied. The results show that the variation of the film thickness of each organic functional layer has an important effect on the performances of OLED microdisplay, such as brightness and color coordinate, and the OLED microdisplay reaches a higher brightness of 3342 cd/m2 under the normal working voltage at 5.0 V after the structure is optimized, with CIE coordinate (0.28, 0.37), which is closer to the energy point of standard white light.

Study on Microcavity Organic Light-emitting Devices Containing Negative Refractive Index Dielectric Layer

Optical Properties of Unsymmetrical Metal Microcavity in Organic Luminescent Devices

Optical trait of unsymmetrical metal microcavity in organic thin film luminescent devices

A Novel Organic Electroluminescent Device Using A New Eu3+ Polymer As Emitting Layer

Light Emitting Devices Based on Nanocrystalline-Silicon Multilayer Structure

Improving Performance of Si/CdS Micro-/Nanoribbon P-N Heterojunction Light Emitting Diodes by Trenched Structure

Improvement of Blue Llight-Ight-ight-eeemitting Mitting Ddiodes Iodes with an Undoped Graded Layer As the Electrons Tunneling Barrier Layer

Design of tunable wavelength microcavity organic electroluminescent diode with liquid crystal

Studies on the Microstructure, Optical and Electrical Properties of Organic Microcavity Devices Based on a Porous Silicon Reflector

High-efficiency Red Phosphorescent Organic Light-Emitting Diodes Based on Metal-Microcavity Structure

Enhancing Light Extraction of Organic Light Emitting Diodes by Deep-Groove High-index Dielectric Nanomesh Using Large-area Nanoimprint

Improving the optical properties of organic light-emitting diodes using random nanoscale rods with a double refractive index

Microcavity Design Upping Light Extraction Efficiency over 50% in High-Index Perovskite Light-Emitting Diodes

Improving AlGaInP Micro-LEDs Characteristics via Varied Dielectric Passivation Layers

Highly Efficient Inverted Light-Emitting Diodes Based on Vertically Aligned CdSe/CdS Nanorod Layers Fabricated by Electrophoretic Deposition

P-141: High-Efficiency and Long Lifetime Electrophosphorescent Organic Light-Emitting Diodes with Improved Hole-Electron Balance by Using Alternate Multilayer Structures

Narrowband Emission and Enhanced Stability in Top-Emitting OLEDs with Dual Resonant Cavities

Significant Light Extraction and Power Efficiency Enhancement of Organic Light Emitting Diodes by Subwavelength Dielectric-Nanomesh Using Large-area Nanoimprint

Exploration of High Efficiency AIE-Active Deep/Near-Infrared Red Emitters in OLEDs with High-Radiance

Design Simulation and Preparation of White OLED Microdisplay Based on Microcavity Structure Optimization

New Red Organic Electroluminescent Materials Based on Neutral Red