Abstract:The static drill rooted nodular pile is a new type of pile foundation consisting of precast nodular pile and the surrounding cemented soil.This composite pile has a relatively high bearing capacity and the mud pollution will be largely reduced during the construction process by using this type of pile.In order to investigate the bearing capacity and load transfer mechanism of this pile,a group of experiments were conducted to provide a comparison between this new pile and the bored pile.The axial force of a precast nodular pile was also measured by the strain gauges installed on the pile to analyze the distribution of the axial force of the nodular pile and the skin friction supported by the surrounding soil,then 3D models were built by using the ABAQUS finite element program to investigate the load transfer mechanism of this composite pile in detail.By combining the results of field tests and the finite element method,the outcome showed that the bearing capacity of a static drill rooted nodular pile is higher than the bored pile,and that this composite pile will form a double stress dispersion system which will not only confirm the strength of the pile,but also make the skin friction to be fully mobilized.The settlement of this composite pile is mainly controlled by the precast nodular pile;meanwhile,the nodular pile and the surrounding cemented soil can be considered as deformation compatibility during the loading process.The nodes on the nodular pile play an important role during the load transfer process,the shear strength of the interface between the cemented soil and the soil of the static drill rooted pile is larger than that of the bored pile.

BOTDR BASED DISTRIBUTED STRAIN TEST ON BORED PILE BURIED IN COMPLICATED GEOLOGICAL GROUND

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Field Trials on Monotonic Behaviour of a Driven Pile at an Offshore Wind Farm in China

Application of Distributed Fiber Optic Sensing Techniques in Bored Pile Detection

Multipoint Traveling Wave Decomposition Method and Its Application in Extended Pile Shaft Integrity Test

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Distributed Monitoring of Bored Pile Compression Deformation Based on BOTDR

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Characteristics and Application of BOTDR in Distributed Detection of Pile Foundation

A test on base bearing capacity of static drill rooted nodular pile

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Vertical Bearing Capacity of Large-Diameter Bored Pile

Application of Distributed Optical Fiber Sensing to Testing Inner Force of Prefabricated Piles

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Research on the bearing mechanism of the super-long pile based on BOTDR

Experimental Study on BOTDR Temperature Compensation in Bored Pile Detection

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

A Destructive Field Study on the Behavior of Pile under Ten

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

BOTDR Monitoring Analysis of Anti-Sliding Pile Internal Force