Abstract:with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene;The appearance of nitrogen oxide compounds during steam regeneration makes the regeneration temperature not too high.We derive the kinetics of steam regeneration and obtain an activation energy of about 177.8 kJ/mol during the steam regeneration process.Compared with the air combustion process, the steam regeneration process is more difficult to occur.Methanol-to-olefins (MTO) is industrially applied to produce ethylene and propylene using methanol converted from coal, synthetic gas, and biomass. SAPO-34 zeolites, as the most efficient catalyst in MTO process, are subject to the rapid deactivation due to coke deposition. Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process, compared to that by air regeneration. A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work. In doing so, we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure, acidity, residual coke properties and other structural parameters. The results show that with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene, which are normally considered as active hydrocarbon pool species in MTO reaction. However, when the regeneration temperature is too high, nitrogen oxides can be found in the residual coke. Meanwhile, as the regeneration temperature increases, the quantity of residual coke reduces and the acidity, BET surface area and pore structure of the regenerated samples can be better recovered, resulting in prolonging catalyst lifetime. We have further derived the kinetics of steam regeneration, and obtained an activation energy of about 177.8 kJ·mol−1. Compared that with air regeneration, the activation energy of steam regeneration is higher, indicating that the steam regeneration process is more difficult to occur.© 2020 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd.. All rights reserved.

Performances of Scale-up Prepared Catalyst for Methanol to Light Olefins

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Characteristics of Coke Deposition over A Sapo-34 Catalyst in the Methanol-To-Olefins Reaction

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Methanol to Propylene over Foam SiC-Supported ZSM-5 Catalyst: Performance of Multiple Reaction–Regeneration Cycles

Reaction-Regeneration Process of Methanol-to-Light Olefins in Fluidized Bed

Performances of SAPO-34 Catalysts with Different Ratios of Si to Al in Methanol-to-Olefins

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Study on Carbon Deposition on SAPO-34 Molecular Sieve Catalyst in Transformation of Methanol to Olefins

Transition metals-Modified SAPO-34 for methanol conversion to light olefins

Synthesis of SAPO-34 catalysts via sonochemically prepared method and its catalytic performance in methanol conversion to light olefins

Performance analysis of methanol to olefins process in fluidized bed reactor

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

Bifunctional Catalysts Composed of Low Silicon‐content SAPO‐34 Nanosheets and in 2 O 3 /zro 2 with Improved Performance for CO 2 Hydrogenation

The Synthesis of SAPO-34 with Mixed Template and Its Catalytic Performance for Methanol to Olefins Reaction

Synthesis of SAPO-34 Molecular Sieves and Their Catalytic Performances in Methanol-to-Olefins Reaction

Template-assisted preparation of metal-modified SAPO-34 molecular sieves for the catalysis of methanol-to-olefins

Kinetics of Methanol to Olefins over Fresh SAPO-34 Catalyst

Kinetics of steam regeneration of SAPO-34 zeolite catalyst in methanol-to-olefins (MTO) process

Synthesis of SAPO-34 catalyst with different silicon contents and their catalytic performance in chloromethane to olefins