Abstract:The surface modification of calcium carbonate (CaCO3) particles, which is used as a filler, significantly affects the properties of the composed materials. The effects of thermal treatment on ground calcium carbonate (GCC) particles subjected to hydrophobic modification using sodium stearate (RCOONa) were studied. The contact angle of the modified GCC particles increased from 24.7 degrees to 118.9 degrees when the amount of RCOONa added was increased from 0% to 5% and then decreased to 97.5 degrees when the RCOONa content was further increased to 10%. When a large amount of RCOONa was added, RCOO-reacts with Ca2+ and generates (RCOO)(2)Ca nuclei, which are adsorbed on the surface of the GCC particles, forming a discontinuous (RCOO)(2)Ca modified layer. After thermal treatment under sealed conditions, the contact angle of the GCC particles modified using 1.5% RCOONa/GCC increased from 112.8 degrees to 139.6 degrees. The thermal stability of the (RCOO)(2)Ca modified layer was increased, with the temperature increase of the mass-loss peak from 358.0 to 463.0 degrees C. It is confirmed that the spreading of melted (RCOO)(2)Ca nuclei on the surface of the GCC particles during the thermal treatment increased the continuity of the modified layer, converting the physical adsorption of the (RCOO)(2)Ca nuclei into chemisorption. The grafting density of RCOO- on the GCC particle surface after thermal treatment approximates to 5.00/nm(2), which is close to the single-molecular-layer grafting density of RCOO-, indicating that excellent modification was achieved. (C) 2017 Elsevier B.V. All rights reserved.

Preparation and Characterization of Coverage-Controlled CaCO3 Nanoparticles

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

In Situ Preparation of CaTiO3 and Its Effect on CO2 Sorption Performance of Nano-Cao–catio3 Adsorbent

Formation of A Ca12al14o33 Nanolayer and Its Effect on the Attrition Behavior of Co2-Adsorbent Microspheres Composed of Cao Nanoparticles

Preparation of MgO-coated Nano CaO Using Adsorption Phase Reaction Technique for CO2sorption

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Preparation of cage-like nano-CaCO3 hollow spheres for enhanced CO2 sorption

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

The Effect of CaO Content on Sorption Performance of Nano CaO Based CO2 Adsorbent

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

Preparation of Core-Shell Polycarbonate/BaSO_4 Submicron Composite Particles

Network Encapsulation of Nanometer Caco3

The Preparation of Caco3 Nanoparticles by Adding Paana and Its Product Characterization

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Thermal Treatment to Improve the Hydrophobicity of Ground CaCO3 Particles Modified with Sodium Stearate

Preparation and characterization of ultra-hydrophobic calcium carbonate nanoparticles