Abstract:Interfacial solute clustering is an essential step preceding grain boundary (GB) precipitation. Both states, i.e., clusters and precipitates, alter the mechanical, chemical, and corrosion properties of materials. Continuum models cannot capture the atomic details of these phenomena, specifically of the transition from clustering to precipitation. We thus use the structural phase-field crystal (XPFC) model to study the compositional and structural evolution during GB clustering in Al–Cu alloys. The results show that the compositional evolution is dominated by solute segregation to lattice defects at the very beginning and then by confined spinodal decomposition along the GBs. The latter leads to a steep increase in the concentration and then the formation of disordered clusters. This structure acts as a precursor for phase nucleation, just like the decomposed solid solution, and Guinier–Preston zones are the precursors of the thermodynamically stable Al<sub>2</sub>Cu phase in the interior of grains. Two modes of spinodal decomposition are found. (a) On low-angle tilt GBs, spinodal decomposition occurs at the dislocations that constitute the GB. (b) On high-angle tilt GBs, spinodal decomposition takes place inside the entire GB plane. In either case, the structural transition from the disordered low-dimensional precursor states to an ordered phase state takes place following the compositional enrichment. These results shed light on atomic-scale early-stage GB decomposition and precipitation processes in Al–Cu alloys and enrich our knowledge about the coupling effects between compositional and structural evolution during GB phase transformation phenomena.

Modeling Cu Precipitation In Tempered Martensitic Steels

TaC Precipitation Behaviors in Reduced Activation Martensitic Steels

Molecular dynamics simulation of intergranular fracture in austenitic steel containing precipitation

Modeling of Spontaneous Para-equilibrium to Ortho-equilibrium Transition in Cementite Precipitation During Martensite Tempering

Deformation of Fe and Ag Precipitates in Cu Matrix

In-situ TEM study of the dynamic interactions between dislocations and precipitates in a Cu-Cr-Zr alloy

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Multiscale modelling of the morphology and spatial distribution of θ' precipitates in Al-Cu alloys

Atomic-scale study on core-shell Cu precipitation in steels: atom probe tomography and ab initio calculations

Characterization of Carbide Precipitation During Tempering for Quenched Dievar Steel

A General Crystallographic Model of Fcc/Bcc(Bct) Martensitic Nucleation and Growth in Steels

Investigation on Precipitation Behaviors of MX Phase in Reduced Activation Steels

Langer–Schwartz–Kampmann–Wagner precipitation simulations: assessment of models and materials design application for Cu precipitation in PH stainless steels

Numerical understanding of MnS precipitation influence on solute micro-segregation during solidification

Effect of Mn concentration on the kinetics of strain induced precipitation in Ti microalloyed steels

Co-Precipitation Behavior in Ferrite Region During Isothermal Process in Ti-Mo-Cu Microalloyed Steel

Microscopic Mechanisms and Continuous Models of Precipitation Hardening

Atomic-scale study of compositional and structural evolution of early-stage grain boundary precipitation in Al–Cu alloys through phase-field crystal simulation

Study of the influence of alloying elements on Cu precipitation in steel by non-classical nucleation theory

A Precipitation Hardening Model for Al-Cu-Cd Alloys

An Analytical Model for the Kinetics of Strain-Induced Precipitation in Titanium Micro-Alloyed Steels