Abstract:CdS nanorods of high aspect ratio were synthesized through the route of chemical bath deposition under a mild condition. Diphenylthiocarbazone (DPTA) was employed as an organic additive for the synthesis of CdS nanorods. The crystalline and microstructure of CdS nanorods were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The XRD patterns indicate the existence of both cubic and hexagonal phases in the samples. The sample with the pH value of 10.5 showed a hexagonal (111) peak of maximum intensity, indicating the preferential orientation along the c axis of hexagonal CdS phase. Meanwhile, the cubic phase appeared at the pH value of 10.5. The TEM images reveal that the morphology of CdS could be controlled by adjusting the pH value. Highly crystalline CdS nanorods with the diameter of about 50 nm and the length of about 3 mu m were obtained at the pH value of 10.5. The effects of the pH value on the formation of CdS nanorods were studied. The electrical properties of the samples were also investigated. The results show that the sample prepared with DPTA as the organic additive exhibited a much lower resistance than those prepared with PVA as the additive and in pure ethanol. There were two big pi bonds in a DPTA molecule, which benefited the electron transfer. Finally, the growth mechanism of CdS nanorods and electron transfer in DPTA modified CdS nanorods were discussed.

DC electrochemical deposition of CdSe nanorods array using porous anodic aluminum oxide template

Electrochemical Preparation of CdSe Nanowire Arrays

Preparation and Characterization of CdS Nanowire Arrays by Dc Electrodeposit in Porous Anodic Aluminum Oxide Templates

Synthesis of Highly Ordered CdSe Nanowire Arrays Embedded in Anodic Alumina Membrane by Electrodeposition in Ammonia Alkaline Solution

Photochemical Synthesis of Cdse and Pbse Nanowire Arrays on A Porous Aluminum Oxide Template

Preparation of II-VI group semiconductor nanowire arrays by dc electrochemical deposition in porous aluminum oxide templates

Diameter- and current-density-dependent growth orientation of hexagonal CdSe nanowire arrays via electrodeposition.

Preparation Of Cd(Oh)(2) And Cdo Nanorods By Aao Template Method

A Dry Method To Synthesize Dendritic Ag2se Nanostructures Utilizing Cdse Quantum Dots And Ag Thin Films

Directed Assembly of Hierarchical CdS Nanotube Arrays from CdS Nanoparticles: Enhanced Solid State Electro‐chemiluminescence in H2O2 Solution

CdS nanocrystallites prepared by chemical and physical templates

Directional CdS Nanowires Fabricated by Chemical Bath Deposition

Noninjection Synthesis of CdS and Alloyed CdS x Se 1−x Nanocrystals Without Nucleation Initiators

Preparation and Growth Mechanism of CdS Nanorods via Chemical Bath Deposition

Highly Ordered and Well-Oriented Single-Crystal Cdte Nanowire Arrays by Direct-Current Electrodeposition

Synthesis of Sulfide Nanowire Arrays through Template-Assisted Electrodeposition

Anodic alumina template on Au/Si substrate and preparation of CdS nanowires

Template-Assisted Electrochemical Synthesis of CdSe Quantum Dots—Polypyrrole Composite Nanorods

Single Step Synthesis of CdSeS Nanorods with Chemical Composition Gradients

Facile electrochemical synthesis of ZnO/PbSe heterostructure nanorod arrays and PbSe nanotube arrays

Preparation and Photoelectrochemical Properties of CdS, CdSe Co-sensitized ZnO Film Electrode