A High Performance Double-Balanced Gilbert Mixer with Active Loads for 2.4-GHz ISM Band Application
JIANG Mei,ZHANG Xing,LIU Shan,XU Feng,WANG Bo,ZONG Hongqiang,SHEN Jinpeng
2012-01-01
Abstract:The authors present a thorough analysis of the 1/f noise,linearity and conversion gain of a CMOS active double-balanced Gilbert mixer circuit.This mixer,adopting PMOSFETs as loads,is used for direct conversion receiver operating in the 2.4-GHz ISM band.To lower the 1/f noise of this mixer,the parasitic vertical NPN(V-NPN) BJT is used as switch,and the low noise shunt circuits paralleled with the PMOSFETs are adopted as loads.A high performance operational amplifier is also applied with the PMOSFETs,which not only provides a suitable DC bias voltage for the desired signals in the zero intermediate frequency(IF) band to avoid the saturation of the following stage,but also produces enough high conversion gain for the mixer.Meanwhile,the capacitor cross-coupled(CCC) circuits applied in the input transconductance(G m) stage allow further increasing the conversion gain.Besides,to enhance the linearity of the mixer,the common gate(CG) amplifiers as transconductance(G m) input stage devices are adopted.The mixer is fabricated with the TSMC 0.18-μm 1-Poly 6-Metal RF CMOS process.The resulting mixer achieves 17.78 dB conversion gain,13.24 dB NF and 4.45 dBm IIP3 with 3 mA current consumption under a 1.5 V power supply.