Abstract:A glassy phase with glass transition (GT) was formed in a wide B content range of 12‒31 at% for (Co 0.75 Cr 0.125 Mo 0.125 ) 100-x B x alloys. The appearance of GT at the low metalloid content of 12%B among Co-, Fe- and Ni-based alloys is the first, in contrast to the absence of GT for (Fe 0.75 Cr 0.125 Mo 0.125 ) 88 B 12 and (Ni 0.75 Cr 0.125 Mo 0.125 ) 88 B 12 alloys. The Co-based 12%B glassy alloy crystallized through unique three stages, i.e., glass (G) → [G + hcp + fcc] → [G + fcc] → [fcc + M 23 B 6 ]. The appearance of GT is due to the necessity of long-range rearrangement of constituent elements for the simultaneous precipitation of hcp and fcc phases from glassy phase. The glass transition temperature, crystallization temperature, Vickers hardness (Hv) and Young's modulus for the Co-based glassy alloys increase linearly with increasing B content and reach 904 K, 946 K, 1566 and 188 GPa, respectively, at 31%B. The good bending plasticity is retained up to 29%B. The crystallization of the 27‒29%B alloy occurs through G → [G + M 23 B 6 ] → [M 23 B 6 + M 2 B] and the ultrahigh Hv above 2000 is attained for the metastable [G + M 23 B 6 ] phase state. The glassy alloy rod with a diameter of 1 mm was prepared for the 27%B alloy and exhibited ultrahigh yield strength of 4700 MPa, plastic strain of 1% and high oxidation resistance up to about 1200 K. The Co-based bulk glassy alloy with simultaneously high strength, ultrahigh hardness and high oxidation resistance, is promising for the future high hardness and heat-resistance materials.

Formation and High Mechanical Strength of Bulk Glassy Alloys in Zr-Al-Co-Cu System

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Unusual Solidification Behavior of a Zr–Cu–Ni–Al Bulk Glassy Alloy Made from Low-Purity Zr

Synthesis,structure and Mechanical Properties of Zr-Cu-based Bulk Metallic Glass Composites

Glass-forming ability and corrosion resistance of Zr-based Zr-Ni-Al bulk metallic glasses

Formation of Cu–Zr–Al Bulk Metallic Glass Composites with Improved Tensile Properties

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Formation and ultrahigh mechanical strength of multicomponent Co-based bulk glassy alloys

Glass-forming Ability and Thermal Stability of a New Bulk Metallic Glass in the Quaternary Zr–Cu–Ni–Al System

Formation of Zr-based bulk metallic glass with large amount of yttrium addition

Structure and properties of Zr–Ta–Cu–Ni–Al bulk metallic glasses and metallic glass matrix composites

Formation, Structure, and Crystallization Behavior of Cu-Based Bulk Glass-Forming Alloys

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

Thermal Stability and Mechanical Properties of Bulk Glassy Cu-Zr-Ti-(Nb, Ta) Alloys

Zr-based Bulk Metallic Glass Composite with in Situ Precipitated Nanocrystals

PREPARATION AND PROPERTIES OF HIGH STRENGTH BULK METALLIC GLASS Ti_(53)Cu_(15)Ni_(18.5)Al_7M_3Si_3B_(0.5) (m=zr, Hf, Sc)

Glass-Forming Ability and Mechanical Properties of the Ternary Cu-Zr-Al and Quaternary Cu-Zr-Al-Ag Bulk Metallic Glasses